EVGA nForce 750i SLI Getting Started

The mainboard is based on NVIDIA® nForce 750i SLI (C72P) & 430i (MCP51) chipsets for optimal system efficiency. Designed to fit the advanced Intel® CoreTM2 Extreme, CoreTM2 Quad, CoreTM2 Duo, Pentium® Dual- Core and Celeron® processors, the mainboard deliv ...

Dual-Core and Celeron® processors in the LGA775 package - Supports Intel® SpeedStep Technology (EIST) - Supports Intel® Hyper-Threading Technology (HT) FSB - 400/ 533/ 800/ 1066/ 1333/ 1800 (OC) MHz Chipset - North Bridge: NVIDIA® nForce ...

nForce 430i - 1 eSATA port support RAID 0/ 1 mode by JMicron® JMB363 Floppy - 1 floppy port supports 1 FDD with 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB Back Panel - 1 PS/2 mouse/ keyboard port - 1 optical S/PDIF-out port - 1 coaxial S/PDIF-out port - 1 debug LED - 1 ...

Mainboard Layout PCI1 PCI_E1 PCI_E2 PCI_E3 PCI2 IDE1 IDE2 FDD1 J1394_1 JAUD1 BATT + JUSB1 SYSFAN3 JCOM1 T: LINE-IN M: LINE-OUT B: MIC T: RS-OUT M: CS-OUT B: SS-OUT SATA3_4 SYSFAN2 JPWR2 JCD1 JPWR1 CPUFAN1 SATA1_2 JFP1 JFP2 T: MOUSE/ B: USB PORTS KEYBOARD T: LAN JACK B: USB PORTS T: 1394 PORT B: USB PORTS/ ESATA P ...

the model you purchased. Packing Checklist Mainboard Driver/ Utility CD Back I/O Shield Power Cable SATA Cable Standard Cable for IDE Devices 2-Way SLI bridge cable ...

hardware setup procedures. While doing the installation, be careful in holding the components and follow the installation procedures. For some components, if you install in the wrong orientation, the components will not work properly. Use a grounded wrist strap b ...

Memory, p. 2-7 JPWR1, p. 2-9 CPUFAN1, p. 2-16 CPU, p. 2-3 IDE1/ 2, p. 2-14 FDD1, p. 2-15 SATA1/ 2/ 3/ 4, p. 2-15 SYSFAN1, p. 2-16 J1394_1, p. 2-16 Slots, p. 2-28 JAUD1, p. 2-18 JCD1, p. 2-17 JFP1/ 2, p. 2-17 JUSB1, p. 2-19 JCOM1, p. 2-19 Back Panel, p. 2-11 JPWR2, p. 2-10 SYSFAN3, p. 2-16 JOC1, p. 2-20 SYSFAN2, p. 2- ...

This mainboard supports Intel® processors in the LGA775 package. When you are installing the CPU, make sure to install the cooler to prevent overheating. If you do not have the CPU cooler, consult your dealer before turning on the computer. 1. Overheating will seriously damage the CPU and system. Always make ...

When you are installing the CPU, make sure the CPU has a cooler attached on the top to prevent overheating. Meanwhile, do not forget to apply some thermal paste on CPU before installing the heat sink/ cooler fan for better heat dispersion. Follow the steps below to install the CPU & cooler correctly. Wrong install ...