miGuard PMR1 Instructions Manual

“ whatever your question, we’re just a phone call away “ 0345 257 1000 miGuard Customer Helpline Wirefree PIR, Magnetic Sensor & Remote Control Accessory Pack ...

miGuard Accessory Pack 1 x Pet Friendly PIR Motion Sensor 1 x Door/Window Magnetic Sensor 1 x Remote Control All Batteries and Fixings Instructions a. Read the instructions thoroughly b. Remove all the contents from their packaging c. Consider the most appropriate positioning of each Accessory d. Avoid mounting Sensors ...

desired protection area: a. Fix the bracket to the wall with the fixings kit supplied. For optimum performance set the the height of the bracket to 2 metres above ground level. b. Adjust angle of the PIR Sensor to cover the required detection area. PIR Installation continued… 5. To test, walk in front of ...

conveniently Arm and Disarm your Alarm System. In the event of an emergency when in or near your property, pressing the SOS button will trigger an alarm condition on the Control Panel/Siren. Features LED Indication Flashes once: transmits the signal Low Light Level: low battery indication, (immediate battery chan ...

Disposal and Recycling Disposal of this product is covered by the Waste Electrical or Electronic Equipment (WEEE) Directive. It should not be disposed of with other household or commercial waste. At the end of its useful life the packaging and product should be disposed of via a suitable recycling centre. Please con ...

© copyright 2014 All rights reserved ...