Composite-ARF SPARK Instruction Manual

Text of Composite-ARF SPARK Instruction Manual

[email protected] Composite-ARF SPARK Instruction Manual Composite-ARF SPARK TAVS Technology version 1.0

Instructions for SPARK Jet airplane

Thank you very much for purchasing our Composite-ARF Spark all composite jet aircraft, made with the revolutionary Total Area Vacuum Sandwich (TAVS) technology If you want a full-color version of this manual, you can download it free from our website as an Adobe Acrobat .pdf file and print it (paper size A4). Just go to th

Important Supplementary Notes

Pre-Flight Checks: Before every session check that all the model’s systems function correctly, and be sure to carry out a range check. The first time you fly any new model aircraft we strongly recommend that you enlist the help of an experienced modeller to help you check the model and offer advice while you are flying. Be cer

Fully-composite aircraft structure

The fuselage, wing and stabiliser are produced in negative molds, manufactured using vacuum- bagged sandwich construction technology. Due to very careful design, material selection and lamination processes the Spark has incredible strength, yet an extremely lightweight air

The fuselage is also made in negative moulds; with the main fuselage from composite laminates,

and the vertical fin using TAVS construction. The main internal parts and bulkheads for the fan unit/turbine mount, nosegear, wing and stabiliser fixings etc are glued in during manufacture, to ensure accurate location and reduce the assembly time for

foam sandwich. It is only necessary to rough up the sur-

face, with 120/180 grit, and clean off any dust with ace- tone or de-natured alcohol (or similar) before gluing to make a perfect joint. You should always prepare both parts to be joined before gluing for the highest strength joints. Don’t use Acetone or paint ‘thinners’ for cleaning external, pa

Composite-ARF Toy Owners Instructions: