Nortel BCM50 Feature User Manual

Use this guide as a quick reference for accessing the features of your telephone. More application-specific feature information is available in the following documents: • CallPilot Telephone Administration Guide for Voicemail features • Call Center Telephone Administration Guide for Call Center features • BCM50 System-wide ...

your telephone does not support the feature, or the feature has not been enabled on your telephone. Your system administrator can provide details. Symbols used in this guide: This guide uses the following labels to indicate each type of configuration but ...

Listen to music (provided by an external source or an IP source connected to the system) through your telephone speaker when you are not on a call. Button Inquiry FEATURE *0 Check what feature is programmed on any button. Use when labeling buttons. Variances * (shows DN) Call Duration ...

password FEATURE 68 plus COS password Change the dialing filters on a line or telephone, or gain external access to your system. Dialing filters determine which numbers you can dial. The COS password is provided by your System Administrator to change your Class of Service. Conference FEATURE 3 Establish a conference call between yours ...

1. Press the line or intercom button of the first caller. 2. Press HOLD. The second caller is automatically put on hold. To re-establish the conference: 1. Retrieve one call from hold. 2. Press FEATURE 3. 3. Retrieve the second call from hold. To send Hookswitch or DTMF during a conference call: Either system telephone ...

Use both the handset and speaker while you are on a call. To avoid elec- tronic feedback, keep the handset away from the speaker during the call, and press RLS to hang up. Variances * (not available) Handsfree Handsfree/mute or Handsfree button Press the key to transfer a call from the handset/headset t ...

1. Press FEATURE 64 or an intercom button. 2. Enter a line pool access code. (See your System Administrator for a list.) Variances * (no intercom buttons) Line redirection FEATURE 84 Cancel: FEATURE #84 Send calls arriving on an external line to another teleph ...

1. Press FEATURE *81. 2. Press the line button that you want to move. 3. Press the button to which you want to move the line. 4. Press RLS. The two buttons are exchanged. 5. Update the button label strip on your telephone. Line buttons cannot be exchanged with inte ...

Internal and external page FEATURE 63 and zone (0 to 6) Make a page announcement through both your telephone speakers and an external loudspeaker system. Zone 0 pages all zones. Incoming page during active call: The system can be set to either: • Put an active ...