PEERLESS IB40 Installation And Assembly Manual
Text of PEERLESS IB40 Installation And Assembly Manual
1 of 6
ISSUED: 12-04-07 SHEET #: 095-9281-4 10-06-10
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
Installation and Assembly:
In-wall Mount for up to 40" Flat Panel Screens
Models: IB40, IB40-S, IB40-W
IN-WALL MOUNT USED WITH ARTICULATING ARM MOUNTS:
PA730, PA740, PP730 and PP740 (NOT INCLUDED)
2 of 6
ISSUED: 12-04-07 SHEET #: 095-9281-4 10-06-10
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
Note: Read entire instruction sheet before you start installation and assembly.
Table of Contents
Parts List.................................................................................................................................................................................3
Installat
3 of 6
ISSUED: 12-04-07 SHEET #: 095-9281-4 10-06-10
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
Before you begin, make sure all parts shown are included with your product.
Parts may appear slightly different than illustrated.
C
F
E
A
G
D
B
H
IB40
IB40-S
IB40-W
Description
Qty.
Part #
Part #
Part #
A
in-wall box
1
095-P1536
095-C4536
095-2536
B
#10 x 1.5" wood screw
2
500-2002
500-2002
500-
4 of 6
ISSUED: 12-04-07 SHEET #: 095-9281-4 10-06-10
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
Installation to Wood Stud Wall
1
• Installer must verify that the supporting surface will safely support the combined load of the equipment and all
attached hardware and components.
• Tighten wood screws so that wall plate is fi rmly attached, but do not overtighten. Overtightening can dama
5 of 6
ISSUED: 12-04-07 SHEET #: 095-9281-4 10-06-10
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
Installing Articulating Arm to In-wall Box
Choose hole pattern on interior mounting plate of in-wall box (A) which align with hole pattern on the wall plate of
articulating arm. Mounting hole alignments may be selected for different height installations.
Note: Consider position of screen center
6 of 6
ISSUED: 12-04-07 SHEET #: 095-9281-4 10-06-10
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
For optional installation of electrical gang box, access plates located on the bottom or top of in-wall box can be
temporarily removed to install electrical gang box as shown in fi gure 4.1.
Insert up to four cable management clips (F) into the desired positions in the in-wall box as shown in �