WARPP WS-200 Instruction Manual

Text of the manual

DC INVERTER TIG

WELDING MACHINE WS-200 INSTRUCTION MANUAL WARPP ENGINEERS PVT. LTD. B-1005, Western Edge II, Near Metro Mall, Off. Western Express Highway, Borivali (E), Mumbai-400 066. Tel: 91-22-28542272 /73/74. Fax: 91-22-28542275. Email:[email protected] Web Site: www.warpp.co.in

· - 1 -

CONTENTS 1. Contents ··················································································································································

· - 2 -

SAFETY WARNING On the process of welding or cutting, there will be possibility of injury, so please take protection into consideration during operation. For more details please review the Operator Safety Guide, which complies with the preventive requirements of the manufacturer. Electric shock——May lead to de

· - 3 -

MACHINE DESCRIPTION Welding machine is a rectifier adopting the most advanced inverter technology. The development of welding equipment benefits from the appearance of the inverter power supply theory and components. Inverter arc welding power source utilizes high-power component MOSFET to transfer 50/60Hz freque

· - 4 -

TECHNICAL PARAMETERS TABLE Model Parameters WS 200 Power voltage(V) single phase AC220V±15% Frequency(Hz) 50/60 Rated input current(A) 30.8 Output current.(A) 10~200 Rated working volt.(V) 18 No-load volt.(V) 56 Force adjustment(A) —— Duty cycle(%) 60 No-load lo

· - 5 -

INSTALLATION INSTRUCTION The machine is equipped with power voltage compensation equipment. When power voltage fluctuates between±15% of rated voltage, it still can work normally. When use long cable, in order to prevent voltage form going down, bigger section cable is suggested. If cable is too long, it may aff

· - 6 -

PANEL FUNCTION INSTRUCTION Front Panel 1. Power switch 2. Power indicator led 3. Abnormal indicator led 4. Welding current adjustment 5. MMA / TIG switch 6. Positive output terminal 7. Torch switch socket 8. Gas-electricity system output terminal 9. Negative output terminal

· - 7 -

OPERATION INSTRUCTION TIG Welding Description 1. Turn on the power switch of front panel, digital current meter is normal, fan begins to run. 2. Turn on argon switch, and adjust gas pressure to rated value.(refer to flow table). 3. Press switch of torch, electromagnetic valve is started. You will hear the sound o

· - 8 -

NOTES OR PREVENTIVE MEASURES 1. Environment 1) The machine can perform in environment where conditions are dry with a dampness level of max 90%. 2) Ambient temperature is between -10 to 40 degrees centigrade. 3) Avoid welding in sunshine or drippings. Do not let water enter the gas 4) Avoid welding in dus

More WARPP Welding System Owners Instructions: