ZALMAN FX100 Operation & User’s Manual

please read the following precautions. www.ZALMAN.com FX100 AMD Socket FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2 CPU&APUs Intel Socket LGA 2011 / 1366 / 1156 / 1155 / 1150 / 775 CPUs * Optional 92mm fan is required for Intel LGA 2011/1366 sockets. ...

If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention. 2) To prevent possible injuries, gloves must be worn while handling this product. 3) Excessive force exerted on the fan ...

Installation Clip 3. Components ...

1) Space Requirments 2) Air Guide Removal 3) Cooler Orientation The cooler’s installation requires an unobstructed space of 156mm(width), 156mm(length), and 157mm(height), with the CPU as a central reference point. Please check if components such as ODDs and PSU protrude into the required space. Air guides on enclosures ...

※ Make sure to install the Clip Support by following specific instructions based on your CPU socket. ※ Optional fan is required for LGA 2011 socket CPUs. (fan sold separately) 1) Intel Socket 2011 Installation ① Fasten Nipple B to the clip support’s hole on the motherboard. ※ Backplate, Load ...

Socket 775 Socket 1156/1155/1150 Socket 1366 ② Attach Double-sided Tape to the center of the Backplate and remove the Double-sided Tape’s Cover. ※ Socket LGA 1366/1156/1155/1150 Installation does not require the Loading Block. ① Install Bolts to the Backplate according to the Socket ...

① Install Bolts to the Backplate according to the Socket Type and secure with Side Caps. ③ Attach Double-sided Tape to the Loading Block and remove the Double-sided Tape Cover. ② Remove the Sticker Cover from the Lower Tier of the Loading Block and attach it to the Backplate. Double-sided Tape Loadi ...

with motherboard’s clip support holes, attach it to the back side of the motherboard, and then fix it with Intel’s washer(0.1mm) and Nipple A. Intel Washer ⑤ Install the clip support on the motherboard using nuts. Nut Clip Support Please make a note of the orientation of the Clip Support. O X ...

B. AMD Socket Installation ① Install Bolts to the Backplate according to the Socket Type and secure with Side Caps. ② Remove the Sticker Cover from the Lower Tier of the Loading Block and attach to the Backplate. ③ Attach Dobule-sided Tape to the Loading Block and remove the Do ...

the included Clip support using Nipple A, AMD’s washer(1mm) and nuts. ※After installing the Clip Support, please mount the CPU cooler as following. C. Cooler Installation ① Apply a suitable amount of the included Thermal Grease ...