Volvo Penta MS2 Workshop Manual
Text of Volvo Penta MS2 Workshop Manual
MS2, MS2B-A, MS2B-L, MS2A-D
MS2A-E, MS2L-D, MS2L-E, MS2V
120S, 120S-B, 120S-C, 120S-D, 120S-E
Workshop manual
2(0)
A
MS2, MS2B-A, MS2B-L, MS2A-D MS2A-E, MS2L-D, MS2L-E, MS2V
Sailboat drive
120S, 120S-B, 120S-C, 120S-D, 120S-E
Contents
Safety information......................................................... 2
Introduction ................................................................. 2
Important .................................................................... 2
General information ...................................................... 5
About the
The workshop manual contains technical data, de-
scriptions and repair instructions for products or prod-
uct versions noted in the table of contents, supplied
by Volvo Penta. Make sure you use the correct work-
shop literature.
Read the available safety information, “General in-
formation” and “Repair instructions” in the work-
shop manual before you start to do any service
work.
Important!
Th
Always use goggles when doing any work where
there is any risk of splinters, grinding sparks,
acid splash or other chemicals. Your eyes are
extremely sensitive, injury could cause blind-
ness!
Avoid skin contact with oil! Long-term or repeat-
ed skin contact with oil can make your skin dry
out. The consequence is irritation, dry skin, ec-
zema and other skin disorders. Used oil is more
hazardous to health than new oil. Use protective
the lifting devise and other who makes sure that
components move freely and are not damaged
during lifting.
When you work aboard a boat, always make
sure that there is enough space for disassembly
where you are working, with no risk for personal
or material damage.
Components in the electrical system, the igni-
tion system (on petrol (gasoline) engines) and
fuel systems on Volvo Penta products have
been designed to minimize the risks
About the workshop manual
This workshop manual contains technical data, de-
scriptions and repair instructions for the MS2 reverse
gear, all versions, and sail boat drive 120S, all ver-
sions. The repair methods for the reverse gear and
drive (upper gear) are essentially the same. Where
they differ, this is noted.
In all correspondence, the product designation and se-
rial number must be specified.
The workshop ma