Sherbourn C-12 Operation & User’s Manual

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important installation, operation, and service instructions in this manual. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of unin ...

long period of time. The C-12 should only be cleaned as directed in the Installation and Operation Manual. Avoid spraying liquids directly onto the C-12 and NEVER spray liquids into the vents. Care should be taken so that small objects do not fall into the insi ...

Introduction..................................................................................................2 The Sherbourn C-12....................................................................................2 About This Manual....................................................... ...

Sherbourn’s innovative C-12 Cooling System is an efficient and flexible solution to the problem of excessive heat in a rack or built-in system. Heat is a major threat to the reliability and performance of modern home theater hardware. All equipment generates heat, and many racks ...

16.7” 9” 8.5” 2.5” TOP 3.25” SHERBOURN C-12 19” 3.5” REAR IN-ON OUT-AUTO 0.1825” FOAM PLUGS SIDE cover plate TOP & BOTTOM (external) C12 body FRONT (front panel removed) front panel FRONT (external) Dimensions: 19” wide x 3.25” high x 9” deep (includes feet, foam plugs Weight: 11 lbs / 5 kg (unboxed); ...

How the Sherbourn C-12 operates is determined both by switch settings and by mechanical reconfiguration of parts of the device. Read and follow the instructions carefully. Improper or incomplete configuration may result in unusual or unexpected behavior. In general, the electrical configuration and switch settings determ ...

In this mode the front panel Power switch is set to the Auto position, the Trigger Mode switch is set to the 12VDC position, and nothing is plugged into the Trigger In connector. The C-12 is controlled by the temperature at the temperature sensor. (If the remote sensor is attached, then this is the temperature at that location; if ...

The parts involved in the mechanical configuration of the C-12 are: • Top and bottom plates - The C-12 is always operated with both top and bottom plates in place. The top plate is removed to facilitate installing the foam ...