Siemens HIPATH 2000 Operation & User’s Manual

2 About this User Manual This User Manual describes the use of the optiPoint application module on the optiPoint 410/420 standard/advance and optiPoint 500 basic/standard/advance. All functions you can use with the optiPoint application module are described. You may find that some functions you wish to use are not available on your tel ...

3 Labels The device conforms to the EU guideline 1999/5/EG, as attested by the CE mark. This device has been manufactured in accordance under a certified environ- mental management system (ISO 14001). This process ensures that energy consumption and the use of primary raw materials are kept to a minimum, thus reducing waste production. ...

Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Labels . . . . . . . . . . . . . . . . . . . . . . . . . ...

Using the ENB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Set up new entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Save entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Online Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 ...

7 Basics of operation The optiPoint application module is used as an add-on with the optiPoint 410/420 standard/advance and optiPoint 500 basic/standard/ advance. On one hand, it supports you while using the optiPoint tele- phone. On the other, the optiPoint application module offers several other functions that you can use intuitively an ...

8 Guidance for reading the operation instructions The operational steps of the device are represented graphically in a logical sequence in the left column. The representations have the following meanings: n Lift handset. t Replace handset. s Conduct conversion. t Press key on the optiPoint application module. Instructions for intuitive op ...

9 Display with touch screen functionality Besides the navigation and selection keys Æ Page 13 you can operate the optiPoint application module using the graphics display supporting touch screen functionality. Overview Operating the display A plastic pen was delivered along with your optiPoint application module. You can select functions ...

10 Start page There are a number of different icons on the start page (this can be invoked at any time by pressing ); each of these icons represents an application (e.g. "ENB"). You can select an application using the navi key p. The selected applica- tion is highlighted. The desired application is started by pressing the t key or by doub ...