Siemens SL10 Service Manual

Mobile Phones Service Manual SL 10 V 1.1 Service Manual SL10 V1.1 PN MP ST R. Fleuren Sm_sl10_lvl2_v11.doc Page 1 of 23 05/98 ...

Mobile Phones 1Table of Contents 1 TABLE OF CONTENTS....................................................................................................................................2 1 TECHNICAL DATA................................................................................................................................ ...

Mobile Phones Service Manual SL10 V1.1 PN MP ST R. Fleuren Sm_sl10_lvl2_v11.doc Page 3 of 23 05/98 1Technical Data Length: 129 mm Width: 50 mm Thickness: 26 mm Volume: 121 cm³ Weight: 138 grams Performance: GSM class 4 (2 Watt) Frequency Range: Tx 890-915 MHz Rx 935-960 MHz Power supply: Lithium Ion battery (3,6V/550mAh) Standb ...

Mobile Phones 2General Information The SL10 is the first Siemens mobile GSM telephone using the new MCM chipset technology. It further consists of a slide mechanism, the so called ProSLIDETM system, which e.g. supports ON-Hook and OFF-hook function. As in S10active, the SL10 also features a real time clock. Addit ...

Mobile Phones 3.1Mechanical drawing of the SL10 Service Manual SL10 V1.1 PN MP ST R. Fleuren Sm_sl10_lvl2_v11.doc Page 5 of 23 05/98 ...

Mobile Phones 3.2Disassembling the SL10 Caution! Inside the telephone there are three flexible cables, which are very sensitive to any kind of mechanical damage. Please be careful during all the disassembling process not to damage them e.g. by bending or snapping. 3.2.1Necessary tools For disassembling the SL10 the following too ...

Mobile Phones 1. Then use your thumb to press the slide up to separate it from the base. The second stop which is mounted at the bottom of the slide has to be released at the same time. To do so, push the bottom of slide upwards and continue pushing the slide with the thumb. The metal blade can be removed when the stop on the to ...

Mobile Phones 3.2.3Disassembling the Slide 1. Unscrew the countersunk-head screw (A) 2. Next, release the lower catch (B) 3. Then release the six lateral catches (1-6 ) 1. After releasing the catches, remove the bottom part of the slide. 2. Now remove the MMI board from the bottom part of the slide by raising the board (1.) and ...

Mobile Phones 1. Now remove the control module and the screen lid. 2. Finally, remove the microphone. Now you completed disassembling the Top of base. Service Manual SL10 V1.1 PN MP ST R. Fleuren Sm_sl10_lvl2_v11.doc Page 9 of 23 05/98 ...

Mobile Phones 3.2.5Disassembling the Bottom Part of the Base 1. First remove the battery baseplate. 2. Then remove the battery contact strip. 3. Finally, remove the charge contacts. 3.3Assembling the SL10 Caution! Inside the telephone there are three flexible cables, which are very sensitive to any kind of mechanical damage. Ple ...