PNI RX5000 Operation Manual
Text of the manual
IDENTIFYING THE PARTS OF THE RX5000...................1
INSTALLING THE RX5000 ............................................2-3
Mounting Guidelines.....................................................2
Windshield Mounting ....................................................2
Dashboard Mounting ....................................................
You have acquired the RX5000 from PNI Corporation, the first
radar/laser detector with a built-in digital compass. The RX5000
incorporates the same compass technology used in built-in com-
passes for GM, Ford and Chrysler vehicles, to provide highly
accurate and reliable compass readings in a radar/laser detector.
FEATURES
• Patented digital compass -- dis
Your RX5000 package includes the following components:
•
The RX5000 -- digital compass and radar/laser detector.
•
Mounting Bracket with Suction Cups -- for windshield
installation.
•
Hook and Loop Fastener Strips-- for dashboard installa-
tion.
•
Coiled 12V DC Power Cord.
•
Operation Manual.
Some packages may also include the following components:
Radar detectors are considered “radio receivers”, as defined by the
Federal Communications Act of 1934, as amended. Radar detectors
are legal in every state when used in automobiles or light trucks
under 10,000 lbs. - with the exception of Virginia, Washington D.C.,
and U.S. military bases. The use of any radar detection device is
prohibited in commerc
The RX5000 can be mounted on your windshield using the
bracket provided, or on the dashboard using the hook and
loop fastener strips.
Mounting guidelines
•
Mount on the windshield or dashboard in a centered loca-
tion that will not obstruct the view of the driver and is
within reach so the buttons can be easily accessed.
•
Do not mount behind windshield
3. Slide the detector into its slot, located on the top back of
the detector.
4. Bend the angle of
the windshield mount-
ing bracket, if neces-
sary, to adjust for best
viewing and detection
angle.
5. Plug the small con-
nector of the power cord into the DC12V power input jack,
located on the side of the detector.
6. Plug the lighter adapter into the lighter
Power On the RX5000
Turn the VOLUME/OFF thumb wheel control on. The
RX5000 goes through a self-test pattern sequence and dis-
plays the last mode previously set in memory.
Modes and Operation
The RX5000 has 3 operational modes:
1. Compass Mode - the unit works as a compass only.
2. Radar Mode - the unit works as a radar detector only.
3. Dual Mode - t