Nokia N93 Service Manual

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 1 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) RM-55 Transceiver characteristics: Band: - RM-55: Dual Mode phone for EDGE/GSM 900/1800/1900MHz + WCDMA2100 (Band I) - RM-153: GSM phone for EDGE/GSM 900/1800/1900MHz Camera: 3,2 Megapixel (2048x1536) Sub camera: CIF (352 x 288) sensor Display: • Active matrix 2.4” QVGA color display with wide 160 ° viewing angle: 320 x 240 pixels, up to 262,144 colors 1.1” second display: 128 x 36 , up t ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 2 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) CHANGE HISTORY Status Version No. Date Comments Draft 0.1 10.Mai.2006 Initial draft Approved 1.0 12.Jun.2006 Approval Approved 2.0 30.Jun.2006 Component overview updated/QTS implemented Approved 3.0 10.Jul.2006 RM-153 added Approved 4.0 17.Jul.2006 Mistake in chapter naming corrected Approved 5.0 29.Aug.2006 POS Concept corrected, New toolkit V2 added Approved 6.0 12.Sept.2007 Exploded view Lower Block update; NOL, -Batt ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 3 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to NOKIA products. This Service Manual is to be used only by authorized NOKIA service suppliers, and the content of it is confidential. Please note that NOKIA provides also other guidance documents (e.g. Service Bulletins) for service sup- pliers, follow these regularly and comply with the given instructions. Wh ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 4 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) Recommendation for the ecologically friendly disposal of components. Colorized components show the different categories. See corresponding ITEM/CIRCUIT REF in the Spare Parts Service Bulletins on NOL. EXPLODED VIEW AND COMPONENT DISPOSAL - UPPER BLOCK 2. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 5 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) Recommendation for the ecologically friendly disposal of components. Colorized components show the different categories. See corresponding ITEM/CIRCUIT REF in the Spare Parts Service Bulletins on NOL. EXPLODED VIEW AND COMPONENT DISPOSAL - LOWER BLOCK 3. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 6 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) COMPONENT OVERVIEW 4. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 7 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) FLS-4S incl. ACF-8, Driver and User Guide Dongle and flash device incorporated into one package, devel- oped specifically for POS use. ACF-8 Universal Power Supply is used to power FLS-4S. Travel Charger AC-4 Small and lightweight charger for fast charging of your phone battery. Internal Battery BP-6M Inserted under the back cover, this Li-Ion battery provides power in a lightweight package. Headset HS-23 Small and light ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 8 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) Lead-free Solder Wire Mandatory for lead-free products (Level 2 only). 0772040 NMP Standard Toolkit (V2) For more informations refer to the Service Bulletin (SB-011) on NOKIA Online. Supplier or manufacturer contacts for tool re-order can be found in “Recommended service equipment” document on NOKIA Online. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 9 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) SW-UPDATE 6. Flash Concept – (Point of Sales) To use FLS-4S Flash Dongle you have to follow the user guide inside the sales package. Please check always for the latest version of flash software, which is available on NOKIA Online. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 10 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) UPPER BLOCK - DISASSEMBLY 7. 1. Needed tools: The SRT-6, the SS-93, metal tweezers, angled tweezers, a dental pic, a torx driver with a torx plus size 6 bit, and a torx plus driver size 6. 2. Cover all windows with a plastic film. 3. Ensure that no battery is inserted before going on. 4. Pry open the Sub Display Window with the SRT-6. 5. Do not use it again. 6. Undo the screw and remove it. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 11 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) 7. Slide along the sides of the Flip C-Cover Assembly, open the two clips as shown. 8. Remove the Flip C-Cover assembly. 9. Protect the Sub Display with a plastic film. 10. Carefully lever up the flex connector of the display. 11. Gently unlock the snaps of the Sub Display. 12. Unscrew the four torx plus size 6 screws and remove them. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 12 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) 13. Unlock the plastic hooks of the Flip Frame. 14. Remove the Magnet. 15. Lift out the glued in IHF Slim. 16. Carefully lever up the CIF Camera flex connector. 17. Remove the CIF Camera. 18. Lever up the Flip PWB Module. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 13 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) 19. Now the glued in Earpiece can be removed easily. 20. Open this flex connector evenly. 21. Gently lever up the connector with the dental pic. 22. Undo both screws and remove them. 23. Open the assembly and remove the protection film. 24. Push out the Flip A-Cover together with the Main Display. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 14 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) 25. Protect the display with a plastic film. 26. Carefully lever out the Flip Soft Keymat. 27. Remove the IR Window. 28. Pull out the Flip Corner Bumper. 29. Mind the cables while removing the Detector Holder with tweezers. 30. Use the angled tweezers for levering out the connector as shown. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 15 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) 31. Unscrew both torx size 6 screws and discard them. 32. Always use new screws when reassemble. 33. Carefully separate the parts, mind the switch of the Flip PWB Module. 34. Peel off the Flip Frame Adhesive Tape with tweezers. 35. Ensure that no residues remain. 36. Gently peel up the glued Flip PWB Module with the SS-93. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 16 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) 37. Release the latches of the Capture Key Cover Module. 38. Use the SS-93 to unlock all snaps. 39. Now the Capture Key Cover Module can be removed easily. 40. Remove the Capture Key Button, Spring and the Zoom Key Lever. 41. Now the disassembly procedure is complete. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 17 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) 1. Align the Zoom Key Lever into the Capture Key Cover Module as shown. 2. Place the spring and the Capture Key Button. 3. Set the recess of the Zoom Key Lever in position shown. 4. Position the Capture Key Cover Module and press it down quickly. 5. Check the functionality of the Zoom Key Lever before continue. 6. Now push the cover into the correct position. UPPER BLOCK - ASSEMBLY 8. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 18 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) 7. Use new adhesives before placing the Flip PWB Module. 8. Align the Flip PWB Module to the guides and smooth it down evenly. 9. Hold the switch in position shown and align the hinge over the Flip B-Cover. 10. Insert two new screws. 11. Fit the torx size 6 bit and set the correct torque. 12. Apply the torque to both screws. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 19 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) 13. Place the switch in position shown. 14. Slot the smaller connector through the Flip B-Cover. 15. Close the connector while pushing from behind the Flip PWB Module. 16. Place the Detector holder. 17. Insert the Flip Corner Bumper. 18. And the IR Window. ...

CMO Operations & Logistics Multimedia Creation & Support CONFIDENTIAL 05.Nov.2007 20 Service Manual N93 RM-55 / RM-153 Copyright © 2006 NOKIA Corporation. All rights reserved. Approved 7.0 MGR Page (50) 19. Carefully place the Flip Soft Keymat. The snaps are very delicate and can break easily. 20. Remove the protection film from the Main Display. Slot the flex foil through the Flip B-Cover. 21. Fit the Flip A-Cover Assembly, beginning from the bottom side. 22. Click all snaps into their places. 23. Close the assembly. Insert both screws. 24. Set the correct torque. ...