wheeler MTB/CROSS Operating Instructions Manual

Please perform the functional check on pages 19-22 before every ride! Please observe bike card on the rear cover! Your Wheeler bicycle and this translation of these original operating instructions comply with the safety requirements laid down in the European standard EN 14766 mountain bike and EN 15194 are referred to as pedelecs. Operating Instructions www.wheeler.ch MTB / Cross Pedelec /  ...

5 Bremsscheibe 6 Umwerfer 7 Zahnkranz 8 Schaltwerk 9 Kette 10 Kettenblatt A Motor B Akku c Display und Bedieneinheit 11 Tretkurbel 12 Pedal 13 Vorbau 14 Lenker 15 Bremshebel 16 Schalthebel 17 Lenkungslager 18 Bremse vorne 19 Bremssch ...

operating instructions The illustration shows a typical mountain bike and an E-bike/pedelec – this type corresponds to the WHEELER bicycle or WHEELER pedelec that you have just purchased. Today’s bicycles and e-bikes/pedelecs come in a great many types that are designed for specific uses and are equipped accordingly. In the present operating instructions bicycles with drive support and described as EPACs in the European s ...

unless you comply with the corresponding handling instruc- tions given or take preventive measures when using your WHEELER pedelec. Please note as well in all cases the gen- eral warning information given in these operating instruc- tions. S This symbol warns you of incorrect actions that could re- sult in damage to property and the environment when using your WHEELER pedelec. Please note as ...

Checking and Readjusting................................................................................................ ...

Dear Customer, In purchasing this WHEELER bicycle (a-d) you have chosen a product of high quality and technology. Each component of your new WHEELER bicycle has been designed, manufactured and assembled with great care and expertise. Your WHEELER bicycle dealer gave the bicycle its final assembly and adjustment to guarantee proper operation and many enjoyable riding experiences with complete peace of mind from the very first metres. ...

pedelecs). These regulations may differ in each country. Please respect nature when riding off-road. Only use your pedelec on signposted, well maintained trails and hard-surface roads. Always bear in mind that you travel rapidly and quietly when you are riding a WHEELER pedelec (b). Do not startle pedestrians or other cyclists. Always make others aware of your presence well ahead of ...

Assisted Cycles) are bicycles with an auxiliary motor that only switches on when the pedals are moved by the rider. When you stop pedalling, the motor switches off. A driving licence is not required for riding a pedelec (b) if the mo- tor assistance switches off automatically at a speed of 25 kmh/15 mph. You do not need an operating licence and need not insure the pedelec either. Plea ...

tracks where mopeds are not allowed if you ride without drive as- sistance to maximum 20 km/h (12 mph), with drive assistance to maximum 25 km/h (15 mph) or with the motor switched off com- pletely. Be sure to also read the chapter “Riding a WHEELER Speed Pedelec – Special Features”. Most of the speed pedelecs (a) are designed for cycling exclusively on lanes and roads with a smooth surfa ...

with the respective legal requirements. These requirements may vary in each country. The fittings of your bicycle are, therefore, not necessarily complete. Ask your WHEELER bicycle dealer con- cerning the laws and regulations applicable in your country or in the country you intend to use your WHEELER bicycle. Have your WHEELER bicycle equipped accordingly before using it on public roa ...

use, as it may otherwise not withstand the stress and fail! Danger of an accident! g Make particularly sure there is enough space between your crotch (a) and the top tube so that you do not hurt yourself, if you have to get off your pedelec quickly. G Please note that in wet conditions the brake performance is less effective and the tyre grip is reduced. Keep this fact in mind in particular whe ...

during the day and only in dry rooms which have a smoke or a fire detector; but not in your bedroom. Place the bat- tery during the charging process on a big, non-inflammable plate made of ceramics or glass! Unplug the battery once it has been charged up. H Charge your battery only with the supplied charger. Do not use the charger of any other manufacturer, not even when the connector of the charger ...

towards the handlebars (a). The brake pads of rim brakes must hit the rim evenly with their entire surface without touching the tyre during braking or in the open state or in between. Make sure you cannot pull the brake levers all the way to the handlebars and check the cables for leaks in the case of hydraulic brakes. Check the thickness of the brake pads, as well. With disc brakes ...

your WHEELER Pedelec 1. Are the connections of the rechargeable battery, the control ele- ment on the handlebars and the drive system properly plugged in (a)? You can find further information in the chapters “Inserting and Removing the Battery” and “Operating the BionX Propulsion System” in your BionX system operating instructions. 2. Is your battery fully charged (b)? Remember to fully rech ...

the rear derailleur may collide with the spokes. This can result in damage to the rear derailleur, the rear wheel and the frame. Check the function of the front derailleur, as a displaced front derailleur (a) can throw off the chain, thus interrupting the drive train of your WHEELER bicycle. You can find further information in the chapter “Gears” and in the instructions from the par ...

your WHEELER Pedelec 1. Check the rechargeable battery (a). If the rechargeable battery is no longer properly in its holder or shows any damage, do not use your WHEELER pedelec any longer, or at least, not in assistance mode. Switch off the motor and the battery separately, if neces- sary. A damaged battery can lead to a short-circuit or a sudden failure of your WHEELER pedelec assistance right at the ...

Open the quick-release. The marking “Open“ on the lever should be- come visible now (a). Make sure the component to be fastened is in the correct position. You can find further information in the chapters “Wheels and Tyre Equipment” and “Adjusting the WHEELER Bicycle to the Rider” and in the instructions from the parts manufacturers, which you can find on the enclosed CD. Move the lever ...

high stress occurring e.g. during freeriding, cross-country, downhill rid- ing or jumps. They provide suspension forks with a suitable stiffness. i Before mounting or replacing a fork/wheel combination with thru axle system, be sure to read the operating in- structions of the respective suspension fork or wheel man- ufacturer first. Notes on How to Mount Front Wheels There is ...

Besides the front thru axle systems, there are also rear thru axle sys- tems (a). This system combines extreme stiffness with light weight. To dismount the rear wheel release the axle (with Allen key or RWS quick-release, as provided by the system) and remove it, before dis- mounting the rear wheel as usually. Make sure not to insert the axle (b) into the hub before mounting the rear wheel. Perform the rear wheel mounti ...

The correct saddle height for almost all bicycle types is the height which gives maximum pedalling comfort and efficiency. When pedalling, the ball of your foot should be positioned above the centre of the pedal axle. With your feet in this position you should not be able to stretch your legs completely straight at the lowest point, otherwise your pedalling will become awkward. Check the height of your saddle with flat-soled sh ...