2easy DT24 Operation & User’s Manual

Text of the manual

DT24 USER MANUAL(EN)

2-Wire Video Intercom System Read this manual carefully before using the product, and keep it well for future use.

The monitor is designed with 4 inch screen, it provides a resolution of 320x240

pixels with high quality image display, and it equipped with a handset to com- municate. The touch sensitive button makes the operation more easily. Parts and Function Microphone Mounting Hook LCD Screen Handset MENU Button Terminal Description L1,L2: Bus terminal SW

Accessories include a Bracket, two 4X25 screws (use to fasten the Mounting Bracket),

2 wire connectors (use to connect with Monitor). Installation steps: Installation height for indoor monitor usually is 145~160cm(refer to sketch map). Wire the cable correctly(see the later connection chapter) then hang the Monitor on the Mo

• Pick up handset to talk with the visitor, the talking duration time is 90s. To

end the conversation, please hand up the handset. If the system connects two or more Monitors, pick up any Monitor, the others will be automatically shut off. Door Release During talking state, Press UNLOCK button to open the door for the visitor. Entrance Monitoring When the

swers the call, conversation is started.and the other monitors will stop ringing at

the same time. (Note:the user code of all monitors must be same.) Direct Call Guard unit: A Monitor can be assigned as Guard Unit Monitor; when the Guard Unit Monitor answers the call, conversation with the guard person is started.. -6- Intercom Intercom Call ... Inner Call

• The first item is Scene mode selection: Total 4 screen modes can be select-

ed in sequence: Normal, User, Soft and Bright. Please note whenever you modify Brightness or Colour item, Scene item will be set to User mode automatically. • The Brightness and Colour item is for the image quality setting, adjust the value to get the best image you like. Note

How to set the monitor as a Guard Monitor

A Monitor can be assigned as Guard Unit Monitor; when the Guard Unit Moni- tor answers the call, conversation with the guard person is started.. The code number of 8004 is used to set the monitor as a guard unit monitor and 8005 is used to cancel this function. How to set the monitor panel on In default mode,when re

More 2easy Intercom System Owners Instructions: