Absolute Process Instruments APD 7580 Manuals
- Identifier: id-2242266
- Brand: Absolute Process Instruments
- Device: Transmitter
- Type: Quick start manual, PDF
- Key Aspects: Common Issues and Solutions, Device Disassembly Instructions
- UPD Date: 20.07.2026
- Source File: 2045366.pdf
- Pages: 4
- Description: Comprehensive setup guide for the Absolute Process Instruments APD 7580. It outlines installation and cleaning instructions, performance guidelines, service contacts, device features.
Key Pages and Contents:
-
Precautions, Range Selection, Switch Settings
APD 7580
Output
0-1 V
0-2 V
0-4 V
1-5 V
0-5 V
0-8 V
2-10 V
0-10 V
±5 V
±10 V
0-2 mA
0-4 mA
0-8 mA 2-10 mA 0-10 mA 0-16 mA 4-20 mA 0-20 mA
Switches
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
ABC
-
Polarity must be observed for input and output wiring connec-
tions. If the input and/or output do not function, check switch
settings and wiring polarity.
* Do not make any connections to unused terminals or use
them as wiring junctions for external devices. This may cause
pe
-
Frequency to DC Transmitters, Isolated, Field Rangeable
APD 7580
Input:
0-100 Hz to 0-30 kHz
Output: 0-1 V to 0-10 VDC, ±5 VDC, ±10 VDC, 0-2 mA to 20 mADC
O 1 Minute Setup for 30 Input & 18 Output Ranges
O External Switches & Tables for Range Selection
O Zero and Span Output Calibration Potentiome
-
Input and output ranges, if specified on your order, are factory
pre-configured (at 24°C ±1°C).
Front-mounted Zero and Span potentiometers are used to
calibrate the output to compensate for load and lead variations.
Note: Perform the following calibration procedure any time
swi
Absolute Process Instruments Categories:
