Absolute Process Instruments APD 7580 Quick Start Manual

tions. If the input and/or output do not function, check switch settings and wiring polarity. * Do not make any connections to unused terminals or use them as wiring junctions for external devices. This may cause permanent damage to the module! Input The APD 7580 is compatib ...

Absolute Process Instruments APD 7580 pre-configured (at 24°C ±1°C). Front-mounted Zero and Span potentiometers are used to calibrate the output to compensate for load and lead variations. Note: Perform the following calibration procedure any time switch settings are changed. 1. Apply power to the module and a ...

APD 7580 Input: 0-100 Hz to 0-30 kHz Output: 0-1 V to 0-10 VDC, ±5 VDC, ±10 VDC, 0-2 mA to 20 mADC O 1 Minute Setup for 30 Input & 18 Output Ranges O External Switches & Tables for Range Selection O Zero and Span Output Calibration Potentiometers O Full 1200 V Input/Output/Power Isolation O Input and ...

Absolute Process Instruments APD 7580 APD 7580 Output 0-1 V 0-2 V 0-4 V 1-5 V 0-5 V 0-8 V 2-10 V 0-10 V ±5 V ±10 V 0-2 mA 0-4 mA 0-8 mA 2-10 mA 0-10 mA 0-16 mA 4-20 mA 0-20 mA Switches ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE Input 0-100 Hz L180V L181V L182V L162V L183V L185V L165V ...