ADLINK Technology ND-6021 Manuals

ADLINK Technology ND-6021 Operation & user’s manual (60 pages)

• Identifier: id-1300140
• Brand: ADLINK Technology
• Device: Control Unit
• Type: Operation & user’s manual, PDF
• Key Aspects: Regulatory Compliance Information, Safety and Regulatory Information, Industry Comparisons
• UPD Date: 09.07.2026
• Source File: 1287561.pdf
• Pages: 60
• Description: User documentation for the ADLINK Technology ND-6021. This guide describes safety, system checks, setup instructions, device operation tips.

Key Pages and Contents:

• 1-2 Initialization & Installation

  The analog output can be readback through the module‘ s ADC. which can monitor the ’ real‘ output of the device. The host can check the digital command and the real output to avoid short circuits. The slew rate of the output signal is also controllable by so

• 5-1 Data Format

  5. Analog Output Calibration 5. 1. Calibration The NuDAM analog output module needs to be calibrated. It has a factory default calibration . User can use NuDAM Adminstration utility to do any type of calibration. 5. 2. Analog Output Module Calibration What do you need to do calibr

• Initialization & Installation 1-3

  • Isolation voltage: 5000 Vrms ² Watchdog Function • Module internal watchdog timer : 150 ms • Power failure threshold : 4.65 V • Host programmable watchdog : 100 ms ~ 25.500 sec ² Power • Power supply : +10V to +30V • Power consumption : 1.0W Pin D

• 5-2 Data Format

  6. Send “4mA Calibration $(Addr)0” command to the analog output module to complete the 4 mA calibration. 7. Send the “ Analog Data Output #(Addr)(OutData)” command with output value is 20 mA. For example if the address is 0x03 then the command is #0320.000 8. Use “ T