Efergy E2 Manuals

Efergy E2 Instruction manual (10 pages)

• Identifier: id-631815
• Brand: Efergy
• Device: Security System
• Type: Instruction manual, PDF
• Key Aspects: Information on Regular Maintenance, User Training Recommendations
• UPD Date: 08.07.2026
• Source File: 626908.pdf
• Pages: 10
• Description: Complete operating guide for the Efergy E2. The document explains network setup, operating conditions, software installation, operational procedures.

Key Pages and Contents:

• Step 1 - Activation Of Dual/Multiple Tariff

  Press and hold unit set button for two seconds. On release you will see the voltage setting flash. Press unit set button twice and you will move onto the tariff selection setting. Now you will see the symbol TARIFF 1 flash. Press backwa

• IMPORTANT SAFETY INFORMATION

  IMPORTANT: It is important that you observe some simple precautions before using this product. When installing the efergy monitor you should find that everything is relatively straightforward. However, there are a number of important health and safety issues which you ne

• The e2 monitor needs to know the time and date in order

  to provide you with the correct information. Set the time and date as follows: Step 1 On the reverse of the display you will find the time set button. Press and hold for two seconds. Time set up will flash in the display. Ste

• At the end of its serviceable life, this product should not be treated as household general waste. It should be handed

  over to the applicable collection point for the recycling of electrical equipment, or returned to the supplier for disposal. *All

Efergy E2 Instruction manual (12 pages)

• Identifier: id-1210264
• Brand: Efergy
• Device: Measuring Instruments
• Type: Instruction manual, PDF
• Key Aspects: Support and Resource Information, Warranty and Service Information, Regulatory Compliance Information
• UPD Date: 11.07.2026
• Source File: 948011.pdf
• Pages: 12
• Description: User instructions for the Efergy E2. This guide explains the features and operating guidelines, wiring setup, operation.

Key Pages and Contents:

• Step 6 - Time Period Button

  Press time period button to change from daily, to weekly and to monthly data during AVERAGE or HISTORY mode. During HISTORY mode the backward and forward buttons are used to scroll between date, weeks and months. If I remove the batteries will I lose the infor

• Step 1 - Activation Of Dual/Multiple Tariff

  Press and hold unit set button for two seconds. On release you will see the voltage setting flash. Press unit set button twice and you will move onto the tariff selection setting. Now you will see the symbol TARIFF 1 flash. Press backward or forward button

• IN THE BOX

  HARDWARE INSTALLATION Prior to Installation Mounting Individual or Multiple Circuits Monitor Installation Considerations Installing the CT Sensors MONITOR SETUP Linking the Transmitter and Monitor Setting the Time and Date Setup Instructions Dual

• Step 1 - Function

  Press the top function button to change the information displayed from ENERGY NOW to AVERAGE and to HISTORY. Step 2 - Energy Now The efergy e2 monitor shows instant power(kWh), estimated electricity costs per day and carbon emissions per day. Step 3 - Average The information

Efergy E2 Instructions manual (10 pages)

• Identifier: id-1896264
• Brand: Efergy
• Device: Measuring Instruments
• Type: Instructions manual, PDF
• Key Aspects: System Recovery Procedures, Device Safety Standards
• UPD Date: 23.02.2026
• Source File: 1826498.pdf
• Pages: 10
• Description: Instruction and reference manual for the Efergy E2. The manual elaborates on features and product specifications, device calibration, internal layout.

Key Pages and Contents:

• HOW TO CHANGE THE DATE

  HOW TO CHANGE MODES 15 14 Date Button: Press Date Button to change from daily, to weekly and to monthly data. Up and Down Buttons: During history mode the Up and Down Buttons are used to scroll between date, weeks and months. Day Mode Button: Press MODE button to change the un

• If I remove the batteries will I lose the information on the display?

  If you need to change or remove the batteries, the display has an internal memory, so information stored on the display will not be lost. How do I reset the display (clear the data and start again)? Press Mode a

• IN THE BOX

  SAFETY IT IS IMPORTANT THAT YOU OBSERVE SOME SIMPLE PRECAUTIONS BEFORE USING THIS PRODUCT. When installing the efergy monitor you should find that everything is relatively straightforward. However, there are a number of important health and safety issues which you need to be aware of. Ple

Efergy E2 Operation & user’s manual (40 pages)

• Identifier: id-1132660
• Brand: Efergy
• Device: Monitor
• Type: Operation & user’s manual, PDF
• Key Aspects: Product Performance Metrics, Device Disassembly Instructions, Environmental Impact Assessments
• UPD Date: 06.08.2026
• Source File: 1025735.pdf
• Pages: 40
• Description: User and installation guide for the Efergy E2. This documentation highlights features and regulatory notices, product maintenance, technical specifications.

Key Pages and Contents:

• 8. Make sure that the Launch the CP210…

  box has been selected. Click on Finish to finish the first stage of the installation. 9. The next stage of the installation will now begin. Click on Install to continue. 10. Wait while the driver is installed. 11. Click on OK.

• Step 3. Set TARIFF 1.

  The default tariff flashes. Set the correct tariff (unit cost per kWh) using the [◄] and [►] buttons. Press [unit/set] to confirm. The next activated tariff will appear on the display (2, 3 or 4 depending on the number of activated tariffs). Steg 4. Set TARIFF 2 (or 3, 4

• 8. Setting the time and date

  The electricity monitor must be programmed with the correct time and date in order to give accurate information. N.B. Make sure that the time and date of the electricity monitor match the time and date on your computer, otherwise you may experience difficulty when tra

• You should under no circumstances connect a sensor to a cable if any of the cables lead­

  ing to the meter is damaged in any way. No cables need to be cut. Do not clip any cables. Do not break any seals or such on the meter. Contact your local electricity supplier if you are at all uncertai