Efergy E2 Instructions Manual

If you need to change or remove the batteries, the display has an internal memory, so information stored on the display will not be lost. How do I reset the display (clear the data and start again)? Press Mode and Date Buttons simultaneously and hold for two seconds ‘c ...

Efergy E2 Step 3. Single Tariff Set Up On release you will see the symbol “TARIFF 1” flash. If you are charged one single tariff push Mode Button to confirm. If you have dual tariff rate, please see the following page. Step 4. Electricity Cost Default cost is set at 14p/kWh. This is the average price per kWh electricity that suppliers charge ...

Efergy E2 information to tell where and when you’re saving money. The e2 wireless electricity monitor shows the amount of energy that a household is consuming at the time the display is read. The display can also give the user a reading showing usage in financial ...

9 8 The efergy monitor needs to know the time and date in order to provide you with the correct information. Set the time and date as follows: STEP 1 On the reverse of the display you will find the Time Button. Press and hold for two seconds. Time set up will flash in the display. STEP 2 Set the hour to the correct t ...

Efergy E2 SAFETY IT IS IMPORTANT THAT YOU OBSERVE SOME SIMPLE PRECAUTIONS BEFORE USING THIS PRODUCT. When installing the efergy monitor you should find that everything is relatively straightforward. However, there are a number of important health and safety issues which you need to be aware of. Please read and act upon the important information on the follo ...

Efergy E2 5 4 The e2 monitor is installed by clipping the sensor around the feed cable of your electricity meter. Locate Your Electricity Meter Locate your electricity meter and determine its type. You can normally find this on an outside wall, in the garage, basement or utility room. If you live in a flat, it can often be found outside your front ...

Efergy E2 HOW TO CHANGE MODES 15 14 Date Button: Press Date Button to change from daily, to weekly and to monthly data. Up and Down Buttons: During history mode the Up and Down Buttons are used to scroll between date, weeks and months. Day Mode Button: Press MODE button to change the unit displayed Power Shows the power of your whole house at an ...

Efergy E2 INSTALLATION 7 6 Link Button Learn Button If the LINK is COMPLETED you will see the transmission signal If the LINK is NOT COMPLETED you will see dashes on the display transmission signal 1. Ensure three AA batteries are inserted in the transmitter and three AAA batteries inserted in the display unit. 2. Push the Link Button o ...

Efergy E2 Use Up and Down Buttons to input the cost per kWh. Press Mode Button to save your setting. Tariff 2 set up will flash. Step 4. Electricity Costs - Tariff 2 Use Up and Down Buttons to input the cost per kWh. Press Mode Button to save your setting. Step 5. Electricity Costs - Tariff 3 & 4 Use Up and Down Buttons to in ...