Epson UB-E02 Manuals

Epson UB-E02 Technical reference manual (86 pages)

• Identifier: id-268169
• Brand: Epson
• Device: Network Card
• Type: Technical reference manual, PDF
• Key Aspects: Common Use Cases Explained, Health and Safety Information, Proven Benefits of Use
• UPD Date: 27.07.2026
• Source File: 222044.pdf
• Pages: 86
• Description: Complete usage guide for the Epson UB-E02. It details operating modes and safety precautions, safety information, system parameters.

Key Pages and Contents:

• You can set the TCP/IP.

  Item Explanation Get IP address Auto or Manual is selectable for the UB-E02. Set by PING Check the box if the setting of the UB-E02 by arg/ping is permitted. Subnet mask Set the subnet mask of the IP address. Default gateway Set the gateway. IP

• UB-E02 Technical Reference Guide

  About This Guide This guide is intended to provide all information necessary for system planning, design, installation and application of the UB-E02 for designers and developers of POS systems. Contents of the Guide The configuration of the guide is as fol

• 4-2 Programming Samples

  Rev. A 4.1 Method of Printing to the UB-E02 The UB-E02 has lpr protocol as its general print protocol. It is easy to print by using the lpr protocol because the printing is also supported by the operating system. However, the command statuses sent by the printer are ignore

• 1-2 System Preparation

  Rev. A The following printers cannot use the UB-E02. ❏ TM-J8000, TM-T285, RP-U420 1.4 Other Limitations Be sure to note the following: ❏ When the UB-E02 is installed, the display module connector (DM-D) of the TM printer cannot be used. CAUTION: Do not connect the Ether