Graco 255107 Manuals

Graco 255107 Manual  (4 pages)

• Identifier: id-384363
• Brand: Graco
• Device: Paint Sprayer
• Type: Manual , PDF
• Key Aspects: Special Promotions for Users, Tips for Cleaning and Maintenance
• UPD Date: 04.07.2026
• Source File: 361393.pdf
• Pages: 4
• Description: Official product manual for the Graco 255107. It outlines maintenance guidelines and maintenance guidelines, technical troubleshooting, setup, product safety.

Key Pages and Contents:

• Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441

  Copyright 2007, Graco Inc. is registered to I.S. EN ISO 9001 ti8919a SG10 Spray Guns Model: 255107 Maximum Working Pressure: 3600 psi (248 bar, 24.8 MPa) - For the application of architectural paints and coatings - The following Warnings are for th

• For complete warranty information contact your local Graco distributor, call Graco customer

  service: 1-800-690-2894 or visit our website: www.graco.com. All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves

• Before performing any maintenance on gun, read all warnings

  on front cover of this manual and relieve pressure. Cleaning/Replacing Filter (19) 1. Relieve pressure. Set trigger lock. 2. Unscrew hose from gun at gun swivel. 3. Remove filter (19). 4. Clean filter. Use a soft brush

• Pressure Relief Procedure

  Follow this Pressure Relief Procedure whenever instructed to relieve pressure, stop spraying, check or service equipment, or install or clean spray tip. 1. Turn OFF power and turn sprayer pressure control to low- est pressure setting. 2. Hold gun against side of g