Graco 255107 Manual 

on front cover of this manual and relieve pressure. Cleaning/Replacing Filter (19) 1. Relieve pressure. Set trigger lock. 2. Unscrew hose from gun at gun swivel. 3. Remove filter (19). 4. Clean filter. Use a soft brush to loosen and remove excess debris. 5. Insert clean filter ...

Graco 255107 Copyright 2007, Graco Inc. is registered to I.S. EN ISO 9001 ti8919a SG10 Spray Guns Model: 255107 Maximum Working Pressure: 3600 psi (248 bar, 24.8 MPa) - For the application of architectural paints and coatings - The following Warnings are for the setup, use, grounding, maintenance and repair of this equi ...

Graco 255107 Follow this Pressure Relief Procedure whenever instructed to relieve pressure, stop spraying, check or service equipment, or install or clean spray tip. 1. Turn OFF power and turn sprayer pressure control to low- est pressure setting. 2. Hold gun against side of grounded metal flushing pail. Trigger gun into pail to reliev ...

Graco 255107 service: 1-800-690-2894 or visit our website: www.graco.com. All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. This ...