Intralock Tools 950C Manuals

Intralock Tools 950C Operation manual (19 pages)

• Identifier: id-1324303
• Brand: Intralock Tools
• Device: Computer Hardware
• Type: Operation manual, PDF
• Key Aspects: Step-by-Step Setup Guides, Hardware Setup Instructions
• UPD Date: 30.04.2026
• Source File: 1403456.pdf
• Pages: 19
• Description: Installation guide for the Intralock Tools 950C. It describes operating procedures and wiring setup, power requirements, troubleshooting, control functions.

Key Pages and Contents:

• Displays or selects a manufacturer as well as insert and flat number.

  Displays or selects key code to be cut. Displays cutter angle where applicable. Displays Maximum Space to be cut. Also shows tip type and whether key is paused or not. If p

• Correct depth calibration is more critical than space calibration, but the more exact they both

  are, the better the resulting keys will work. Remember that the allowable range for calibration is from +0.127 inches to-0.127 inches. The machine is factory set for 0 calibration error so you must be c

• to return to EDIT.

  NOTE: PARAMETER TABLE IS COMPLETE PLEASE REVIEW THE TABLE FOR ACCURACY. To review the table, continue pressing the key until the display returns to EDIT. SETTING VALUES IN SPACE TABLE Press the ITL950C will display; SPACE 1 = (0000). Enter the desired space in

• - 120 Volts AC. 2 Amps 60 Hz.

  - 12 Volts DC. 10 Amps Operating Current - AC 1.5 Amp PK. 25 Idle. DC 10 Amp. PK. 1 Idle. Operating Frequency - 60 Hertz/DC. Motor Horsepower - 1/8 H.P. Cutter Speed - 1600 R.P.M. Motor Bearing Type - Sealed Roller Bearing Stan