Master Meter Register Manuals

Master Meter Register Install & remove (4 pages)

• Identifier: id-1500597
• Brand: Master Meter
• Device: Master Meter Register Measuring Instruments
• Type: Install & remove, PDF
• Key Aspects: Troubleshooting Connectivity Issues, Product Lifecycle Information
• UPD Date: 10.08.2026
• Source File: 1497832.pdf
• Pages: 4
• Description: Complete technical documentation for the Master Meter Register. It provides technical information on installation support, maintenance procedures, setup tips.

Key Pages and Contents:

• Page 4 of 4

  Step 6: Twist housing assembly 15 degrees clockwise. Use lid hinge (but not lid!) when twisting. The holes for the stopper snap pin should be a little past the midline when completed. Step 7: Insert stopper snap pin. Step 8: Use any available hard surface (in this case, screwdriver handl

• Page 3 of 4

  Installing New Shroud and Register: Step 1: Starting position of twist on register shroud Step 2: Twist clockwise until mechanical stop. * Final position shown. Step 3: Note locating indentations on register base each 90 degrees. Step 4: Place register in shroud in preferred orientation.

• Page 2 of 4

  Removal of Old Register: Step 1: Old version of register & housing Step 2: Remove tamper seals with screwdriver or punch. Step 3: Unscrew Mounting Screws Step 4: Pull Cover Assembly Straight Up Step 5: Remove register shroud by opening gap and pulling off of body. Step 6: Meter with regi

• Master Meter, Inc. ❘ 101 Regency Parkway, Mansfield, TX 76073 ❘ T: 817-842-8000 ❘ F: 817-842-8100

  M A N U A L / G U I D E Category: Registers Type: Register Shroud / New Design Issue: How to Install & Remove Prior Design