naturebytes Wildife Cam Kit Manuals

naturebytes Wildife Cam Kit Manual (43 pages)

Identifier: id-2357713
Brand: naturebytes
Device: naturebytes Wildife Cam Kit Digital Camera
Type: Manual , PDF
Key Aspects: Detailed Installation Instructions, Common Errors and Solutions, Firmware Update Process
UPD Date: 21.08.2026
Source File: 1929892.pdf
Pages: 43
Description: User instruction manual for the naturebytes Wildife Cam Kit. It describes step-by-step reset instructions, setup instructions, component overview.

Task 7 - Secure the Camera

Now attach the camera to the insert assembly using the screws, spacers and brass nuts. 2 x 25 mm Screws 2 x 18 mm Spacers 2 x Brass nuts Insert assembly What you will need : 14 Usee the correct size spacers and screws Use a ruler to double check 18 mm Spacer 25 …
Controlling the power using a

LiPo Rider (Option B) Task 12 - Assemble the Case I) Place the insert assembly into the front of the case with camera facing down II) Secure with large screws at the four corners III) Connect the LiPo Rider to the Raspberry Pi using the USB cable Case 27 What you will …
Task 9 - Connect the Camera to

the Raspberry Pi The camera ribbon locates into the port highlighted in the image (right). Use this explainer video to help: https://youtu.be/VzYGDq0D1mw or, follow the steps below with the help of the images on the following page; I) Gently l …
Secure the wires onto the insert

Feed the 3 black cable-ties or wire through the holes and twist them to secure the wires to the insert. What you will need: 3 x Black cable ties (or wire) 23 i) use wire or cable ties to attach wires …

Identifier: id-1337701
Brand: naturebytes
Device: naturebytes Wildife Cam Kit Scouting Camera
Type: Manual , PDF
Key Aspects: Troubleshooting Information, Installation Planning Strategies, Additional Resources for Users
UPD Date: 30.03.2026
Source File: 1390057.pdf
Pages: 41
Description: Installation instructions for the naturebytes Wildife Cam Kit. The manual outlines technical specifications and connectivity options, device features, daily usage, operational procedures.

Warning Lithium-ion Batteries!

This kit contains small parts. DO NOT allow children under 5 years old to play with or near this product. Li-ion battery packs may leak, overheat or explode if abused or incorrectly used. Ensure you read and adhere to the following safety warnings. Lithium Ion batterie …
Final Insert Assembly - showing the LiPo Rider power option

24 …
Attaching the Real

Time Clock to the Raspberry Pi Task 8 - Attach the RTC Attach the RTC to the Raspberry Pi, positioning it on the pins shown to the right. Raspberry Pi A + Real Time Clock Make sure the real time clock is positioned the right way round. Compare your Raspberry Pi with the images on …
Locating your Kit - Tips

37 Place your camera at least 500 mm away from the point where you expect to capture your subject. Set up at dawn and retrive the kit at dusk. This will allow for you to review the images you’ve captured and charge your cam kit overnight. 500 mm …