Paxton Net2 Entry Manuals

Page 1
07/19/2012
Ins-30201-US  Net2 Entry - Panel
Technical Support
Technical help is available:     Monday - Friday from 02:00 AM - 8:00 PM (EST)
1.800.672.7298
[email protected]
Documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/
Paxton
The Net2 Entry panel is a robust door entry panel incorporating both door entry and access control functions. It is
powered using  power over Ethernet (PoE) and communicates with the other elements of the system using IPv6,
providing 'plug and play' installation. Each panel is associated with a Net2 Entry control unit which is the interface to
the door hardware.
Description of product
The panel is equipped with a keypad and a proximity token reader.  Net2 software is used to administer the access
control functions.  A resident can use either the keypad or a token to gain entry.  Installers gain access to the menu
options using an engineer code or an engineer token.
1.  Speaker
2.  Proximity reader
3.  Backlit keypad
4.  LCD display
5.  IR LEDS for night time operation
6.  Microphone
7.  Color camera
8.  Light sensor
2
4
5
1
6
7
8
3

Page 1
17/08/2015
Technical Support
Technical help is available:     Monday - Friday from 07:00 - 19:00 (GMT)
          Saturday from 09:00 - 13:00 (GMT)
01273 811011
[email protected]
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
Paxton
The Net2 Entry vandal resistant panel is a robust door entry panel incorporating both door entry and access
control functions. It is powered using Power over Ethernet (PoE) and communicates with the other elements of
the system using IPv6, providing ‘plug and play’ installation. Each panel is associated with a Net2 Entry control
unit which is the interface to the door hardware.
Description of product
The panel is equipped with a keypad and a proximity token reader. A resident can use either the keypad or a token
to gain entry. Installers gain access to the menu options using an engineer code or an engineer token.
Net2 software is used to administer the access control functions.
1.  Speaker
2.  Proximity reader
3.  Keypad
4.  LCD display
5.  LED’s for low light operation
6.  Microphone
7.  Colour camera
8.  Light sensor
Ins-30208 Instructions – Net2 Entry – VR panel
2
4
5
1
6
7
8
3

Configuring a Net2 Entry Premium Monitor
Overview
Configuration - Setting the monitor ID
The Net2 Entry Premium monitor is an audio/video monitor used
to remotely communicate with visitors, and is installed as part of a
Net2 Entry system. It is powered using Power over Ethernet (PoE)
and communicates with the other elements of the system using
IPv6, providing ‘plug and play’ installation.
The only configuration required is the allocation of a monitor ID
which the system uses to identify the correct monitor.
If used in conjunction with Net2 access control software, this must
be version 4.25 or later.
AN1172
Net2
When the monitor is first connected to the network it will not have a Monitor ID number.
The monitor ID is the number that a visitor will call to request entry (unless they are using a text only list) so it should relate to
the location of the monitor where possible e.g. Flat Number.
From the menu, touch settings > engineer > enter the engineer code for the system (if required) > monitor id, enter a Monitor
ID number, then touch accept.
Monitors sharing the same ID will all ring when a call is made to that ID, and some configuration (name, concierge, divert mode)
will be common on all monitors.
1

Setting up and using concierge
Overview
Setting a monitor as a concierge
Concierge functionality in Net2 Entry allows a Premium Monitor
user to take the roll of an attendant, porter or door security.
Enabling concierge at a Net2 Entry Premium Monitor provides
the following functionality:
-
The concierge can make outgoing calls to
non-concierge Net2 Entry monitors
-
The concierge can send text messages to
 non-concierge Net2 Entry monitors
-
Non-concierge Net2 Entry monitors can place calls
to the concierge – can be restricted
-
Non-concierge Net2 Entry monitors can divert  calls to the concierge – can be restricted
The concierge option is within the monitor privileges. You will require your engineer code to access this setting.
From the menu, select settings > engineer > enter your site engineer code > select privileges > then touch set as concierge
so it turns green.
AN1165
Net2
Concierge functionality can only be enabled on a Net2 Entry Premium Monitor.
Note: Concierge is not able to call SIP handsets
For full concierge support, all hardware must be running software version 2.17 or later. If used in conjunction with Net2 access
control software, this must be version 4.25 or later.
1

Ins-30039  2A/12V DC boxed power supply with Net2 ACU
12V
0V
12V
0V
12V
0V
PSU
0V
INPUT          AC  100-240V
                      50 / 60 Hz
                      1.2A
OUTPUT      DC  13.8V        2A