Pertech 5351 Manuals

Pertech 5351 Technical support (37 pages)

• Identifier: id-1160710
• Brand: Pertech
• Device: Pertech 5351 Printer
• Type: Technical support, PDF
• Key Aspects: FAQ Section for Common Queries, Usage Recommendations Under Different Conditions, Energy Efficiency Tips
• UPD Date: 27.06.2026
• Source File: 997669.pdf
• Pages: 37
• Description: Comprehensive guide for the Pertech 5351. This manual covers setup validation, hardware components, testing procedures, assembly reference.

Key Pages and Contents:

• j) Paper Mandrel

  Make sure the paper mandrel spins freely with no paper installed. Make sure the mandrel in seated on both sides in the mounting slots. k) Interface Cable Check the cable to make sure no Pins are bent or the cord is not cracked or damaged. Paper Mandrel Seats

• 1.75 Document Stop

  Right Edge of Form Aligned with Right Edge of Receipt Retail Endorsement. To center justify check in print zone, docu- ment guide is 2.625” from dot column #1 1 Inch Print field is 2.5” Wide Right Justify Validation Print Fields The 5300 series printer has 2.5 inch

• MECH ASSY-I.J VAL. & RECEIPT

  100261046 0.00 102 ADHESIVE (TORQUE SEAL, PURPLE) 100173240 3.00 104 SCREW-WASHER 100173386 1.00 105 SCREW-6-32 X .188 PH FLAT 100173384 3.00 106 SCREW-SHOULDER 100239002 1.00 109 SANDWICH MOUNT 104315006A 4.00 120

• Green Power Light On

  Paper wont feed when pressing paper actua- tor Arm. Lower actuator arm is not engaging the feed switch or feed switch is not working. Check arm by switch to see if it is obstructed, If not printer needs to be checked out by a trained technician. Double printing Weak Stepper