Pertech 5351 Technical Support

parts, service and repair may be obtained by calling 1-800-800-6614. Paper: Call: 1-800-800-6614 Paper Part Number Ink Jet 5351 One Ply.......................................................................................................10 ...

Pertech 5351 Belt adjustment is usually not necessary, but if the column vertical alignment is off the drive belt assembly should be checked. The screw (1.) Should be tight and the belt should not have any play in it. To adjust the belt, back the adjustment screw off enough so that the drive assembly is free to move. Move the print ...

Pertech 5351 Solution: Open cover and remove supply roll. Grasp paper and gently pull paper out of the printer if paper does not move freely gently pull the paper the opposite direction momentarily until it frees. Once paper is removed be sure no paper bits still exist in the printer. Depress paper feed button to verify all gear and rollers turn freely. I. ...

Pertech 5351 that is applicable and current. Pertech reserves the right to improve products as new technology, components, software and firmware become available. No part of this document may be reproduced or transmitted in any form or ...

Pertech 5351 Confirm normal initialization prior to executing a self test by turning power on with the lid closed. Listen for the mechanism to initialize, then rase the cover and ensure the printhead centers. Validation Self Test The validation self test i ...

Date: Company Name Contact Model Number Serial number Customer Indicated Problem. (Symptom) What has changed with the system before the failure. What was happening before the issue occurred. What has been done to resolve the issue. What is LED Status: (See Trouble Shooting Section for help in Issue identification) Power Indicato ...

Pertech 5351 Seals Compensator assembly Printhead Assembly Ribbon Feed Assembly Case Parts Paper Feed Button Sensors Paper Feed Assembly Document Stop Power supply Paper Mandrel Interface Cable Operational Testing Power supply Pa ...

Pertech 5351 hol swab and peel the backing off the (DDS). With a pair of tweezers attach the DDS to the paper deflector assembly. (See PICTURES BELOW & PREVIOUS PAGE FOR PROPER ALIGNMENT ) 1 2 3 Reassemble & Test printer. If installed into Impact 537X model, with compensator closed, push print head left to right to b ...

Pertech 5351 SET-UP INSTRUCTIONS PRESSING THE PAPER FEED BUTTON WHILE THE GREEN LIGHT IS FLASHING WILL REJECT THE LAST PRINTED PARAMETER. IF THE BUTTON IS NOT PRESSED WITHIN 5 SECONDS. THE PARAM- ETER WILL BE ACCEPTED AND THE NEXT SET-UP OPTION WILL BE LISTED. PRESS THE PAPER FEED BUTTON ...

Pertech 5351 The 5300 comes with two communication interfaces, RS-232 Serial and USB. Additionally, the printer has a cash drawer port and a three pin mini din power coupling. The RS-232 interface connector is a DB9M connector and requires a Null Modem Serial cable for standard PC to printer connections. The USB Interface uses a stand ...