Spirax Sarco STAPs Manuals

Spirax Sarco STAPs Installation and maintenance instructions manual (24 pages)

• Identifier: id-2263123
• Brand: Spirax Sarco
• Device: Receiver
• Type: Installation and maintenance instructions manual, PDF
• Key Aspects: Product Lifecycle Information, Emergency Procedures, Limitations of the Device
• UPD Date: 24.03.2026
• Source File: 2024502.pdf
• Pages: 24
• Description: Setup and usage guide for the Spirax Sarco STAPs. The manual highlights shutdown procedures, security instructions, device reset instructions, operating conditions.

Key Pages and Contents:

• IM-P014-05 MI Issue 2

  18 6. Certification and approvals Certfication IECEx certification Equipment protection level Gas Ex d IIC T4 Gb Dust Ex tb IIIC T135oC Db Tamb -20 to +70 °C Standards used IEC 60079-0, IEC 60079-1 and IEC 60079-31 European certification ATEX flame proof II 2 GD Gas Ex d IIC

• IM-P014-05 MI Issue 2

  13 11. A disconnecting device (switch or circuit breaker) must be included in the building / site installation. It must: - Have a rating with sufficient breaking capacity. - Be in close proximity to the equipment, but not fitted in a position that makes it difficult to operate

• IM-P014-05 MI Issue 2

  15 Fig. 12 1 hole M25 x 1.5 - 6H to BS 3643-1 Antenna housing 1 hole M20 x 1.5 - 6H to BS 3643-1 Breather drain 2 holes ¾" NPT to ASME B1.20.1 Conduit connections Protective earth must be connected. Earth bonding connection M6.

• IM-P014-05 MI Issue 2

  11 3.4 Wiring the receiver / repeater This receiver / repeater can be used as either a receiver to convert the Wireless signal received from heads and connect to the LAN to communicate with the PC software, or as a repeater to relay the signal to another receiver using the W

Spirax Sarco STAPs Quick installation manual (20 pages)

• Identifier: id-2263124
• Brand: Spirax Sarco
• Device: Measuring Instruments
• Type: Quick installation manual, PDF
• Key Aspects: Usage Recommendations Under Different Conditions, Health and Safety Information
• UPD Date: 10.04.2026
• Source File: 2024501.pdf
• Pages: 20
• Description: Usage and setup manual for the Spirax Sarco STAPs. The document includes setup guidelines, user instructions, device overview, support details.

Key Pages and Contents:

• IM-P014-16 MI Issue 2

  1 STAPS Wireless Head Unit Quick Installation Guide 1. Safety information 2. General product information 3. Order of installation 4. Installation of head 5. Spare parts 6. Certification and approvals 7. Technical data 8. Technical glossary IM-P014-16 MI Issue 2 0140051/2

• IM-P014-16 MI Issue 2

  2 Safe operation of this unit can only be guaranteed if it is properly installed, commissioned and maintained by a qualified person (see Section 1.11) in compliance with the operating instructions. General installation and safety instructions for pipeline and plant constructio

• IM-P014-16 MI Issue 2

  6 3.1 Accompanying documents The following Installation and Maintenance Instructions are required to complete the system installation: IM-P014-16 STAPS Wireless Head Unit Quick Installation Guide IM-P014-25 STAPS Wireless Receiver / Repeater Installation Guide IM-P014-26 ST

• IM-P014-16 MI Issue 2

  19 7. Technical data Head unit: See Section 3 for mounting options. Integral battery Lithium Thionyl Chloride Maximum altitude 3 000 m (0.7 bar atmospheric) Ambient temperature range -29 to +70°C Maximum pipe temperature 425°C Maximum relative humidity 95% Enclosure rating I

Spirax Sarco STAPs Quick installation manual (36 pages)

• Identifier: id-2263122
• Brand: Spirax Sarco
• Device: Measuring Instruments
• Type: Quick installation manual, PDF
• Key Aspects: Device History and Development, Common User Mistakes
• UPD Date: 16.08.2026
• Source File: 2024503.pdf
• Pages: 36
• Description: Advanced user manual for the Spirax Sarco STAPs. The manual outlines system configuration and troubleshooting tips, safety information, operating modes.

Key Pages and Contents:

• IM-P014-23 EMM Issue 4

  12 Fig. 8 Fig. 9 - Lift housing lid. 3.1.2 Turn head cover anticlockwise to unscrew.

• IM-P014-23 EMM Issue 4

  13 Fig. 10 3.1.3 Unscrew EMC shield screws. Fig. 11 - Lift EMC shield.

• IM-P014-23 EMM Issue 4

  5 1.5 Hazardous environment around the product Consider: explosion risk areas, lack of oxygen (e.g. tanks, pits), dangerous gases, extremes of temperature, hot surfaces, fire hazard (e.g. during welding), excessive noise, moving machinery. 1.6 The system Consider the effect on

• IM-P014-23 EMM Issue 4

  20 3.3.1 How to install the heat shields Remove the fixing clamp retaining nut, ensure the sensor stem does not rotate by using a 16 mm spanner on the flats provided as per Figure 21 and remove the nut as per Figure 22. Failure to do so may affect the factory set loading of th