Lilin IPG1022ELS Instruction Manual

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric The exclamation point within an equilateral triangle is ...

Sensitive electronics inside are vulnerable to excessive shock. Do not install the equipment near any naked flames or heat sources. Excessive heat could damage this unit. Do not expose this unit to rain or excessive moisture, avoid smoke and dust. Please the camera in an environmental housing for protection. If t ...

own one of the many fine network products we manufactured. This product has been carefully inspected under rigid quality control and should reach you in perfect condition. With reasonable care, it will provide years of reliable performance. We recommend that you read this install ...

Camera, built-in H.264 AVC(Advanced Video Coding) video compression. H.264 AVC video compression engine supports high definition video quality, 1080P(1920x1080) resolution, bandwidth efficiency with PPPoE and DDNS. Also it provides higher bit rate of internet and diverse alarm functions such as moveme ...

2. FOCAL LENGTH ADJUSTMENT RING AND LOCKING SCREW 　Use this ring to adjusts the back-focal distance or picture focus. Rotate this 　ring clockwise or counterclockwise for a CS-mount lens. 3. MICROPHONE 　Built-in highly sensitive capacitive microphone. 4. LIGHT SENSOR 　Day and night function auto mode detect. 5. AUTO IRIS CONNECTOR(DC ...

12. DC12V POWER INPUT JACK 　 DC12V (±10%) power input. 13. Micro SD CARD SLOT 　 This network camera is compliant with Micro SD/SDHC card. 14. ALARM IN/OUT & EXTIN TERMINAL +5V COM. GND N.O. DIN 1 2 3 4 5 6 EXTIN +5V Output: Max. output 50mA. N.O./COM.: Max. load +60V/100mA. DIN terminal can be set either N.O. (normall ...

Access into web page setup menu, under audio adjustment setup menu, may select Audio Input mode to either camera front microphone or rear's Audio In (Line IN). ...

mounting surface must be within the following limits: SUITABLE LENSES C - mount lens CS - mount lens 9mm or less 4mm or less FITTING THE LENS Remove the lens mount cap. Screw in the C mount ring(not supplied), until it is secured. When using a CS mount lens skip step2. Screw ...