LRS T7400A Operation & User’s Manual

21 T7400A User Manual If turning function ON: 8. Enter Start Time for Auto Location (- -: - -) and press ENTER to continue. 9. Press F1 (AM) or F4 (PM). Run Locate Run locate is used to immediately locate any misplaced coasters around the restaurants (ideal during clos- ing hours). When activated: • A signal is sent out to ALL guest page ...

LRS T7400A 4550 Excel Parkway, Suite 200 Addison, TX 75001 800.437.4996 • 214.553.5308 www.pager.net T7400A Paging System Transmitter USER MANUAL ...

LRS T7400A Select 2) Alphanumeric Vibe. Press F1 (YES) to turn Alphanumeric Vibration On of F2 (NO) for Off. Manager Pager - Select: 1) Vibe 1 time. 2) Vibe 2 times. 3) Vibe 3 times. F2 (ON) 1) Vibe continuously. 2) Vibe/Beep 1 time. 3) Vibe/Beep 2 times. F2 (ON) 1) Vibe/Beep 3 times. 2) Beep 3 times. 3) Beep conti ...

Cleaning: LRS pagers are made from industrial-strength, polycarbonate material. However, this material is sus- ceptible to hairline cracking if non-approved cleaners are used. When cleaning LRS pagers, we recom- mend only using ISOPROPYL ALCOHOL-BASED CLEANERS. To clean the equipment: 1. Take a clean ...

LRS T7400A 3 T7400A User Manual 1 2 3 4 800.437.4996 www.pager.net Star Pager www.pager.net www.pager.net 1 2 3 4 800.437.4996 www.pager.net 1 4 1 800.437.4996 www.pager.net Wait Time is approx. 5 minutes Staff Pagers: Customer Pagers: Coaster Call Alphanumeric Coaster AdverTeaser (Paddle)Pager Pizza Pager Lobster Pager SP5 1-Line R ...

LRS T7400A 1. Enter the desired time interval in hours and minutes (HH:MM) and Press ENTER. 2. Enter pager number to be alerted. 3. Type in canned message (See Table on pg. 7) and press ENTER. Daily Alarms are alarms that re-page a staff pager at a particular time every day. 1. At the Time of D ...

LRS T7400A one-year period after the original date of consumer purchase. The warranty does not include damage to the product re- sulting from accident, misuse, improper electrical connection, or failure to charge the product within 30 days of ...

LRS T7400A Paging Types in Mixed Systems When using different types of pagers, be sure that alphanumeric pagers are numbered higher than the non- alphanumeric pagers. Setting Crossover Points This function is used to set the crossover points where non-alphanumeric en ...

allow the repeater time to repeat the signal and detect the next one. To add repeat delay: 1. Press SETUP. 2. Enter Password. 3. Press 1) System. 4. Press F2 (DN) until the display shows 2) Repeat Delay. 5. Press 2 (2: Repeat Delay.) 6. Select ...

LRS T7400A Charging Any rechargeable guest pager will require use of an LRS charger. 1. Place the guest pager in the charger. For 15 Coasters, 10 Pizza pager, and 10 Lobster call pagers. Do not stack more than 10 pagers at a time on a Charger. 2. Allow unit to charge fully overnight. 3. Remove from charger, and pager will vibrate, b ...