Record Power RPBG6L Original Instruction Manual

Version 2.0 June 2010 Woodworking Machines & Accessories Telephone: 01246 561 520 Fax: 01246 561 537 Record Power Ltd Unit B, Adelphi Way Staveley S43 3LS Email: [email protected] www.recordpower.co.uk RPBG6L 6” Bench Grinder with Light IMPORTANT For your safety read instructions carefully before assembling or using this ...

5 3. Additional Safety Instructions 6 4. Record Power Guarantee 7 5. Specification 7 6. Installation 7 7. Operating the Grinder 8 8. Mounting of Wheels 8 9. Wheel Care 8. 10. General Care 9. 11. Parts Identification 10 12. Spare Parts Identification 11 Certificate of Conformity ...

forget to fill in and return your guarantee card. (This does not affect your statutory rights). PURPOSE OF THIS MANUAL This manual serves to give details of Specification, Health & Safety, Installa ...

INSTALLATION AND USE OF THIS PRODUCT. KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE. WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury. Safe Operation 1. Eye Protection The ope ...

SENSE AND ALERTNESS AT ALL TIMES WHEN THE MACHINE IS BEING USED. WARNING: For your own safety, do not attempt to operate your dust extractor until it is completely assembled and installed according to the instructions. SAFE OPERATION 1. The machine should be assembled fully before use 2. Loose clothing such as ...

1.  INTRODUCTION 1.1  We supply machinery through a network of dealers and authorised distributors and you should be aware that your contract of sale is with the retailer from whom you purchased this product. 1.2  If you are not satisfied with this product you should in the first instance approach the retailer from whom you pu ...

Motor Power: 250W Speed: 2800rpm Noise Emissions (no load): < 85db (A) Weight: 6kg (13.2lbs) 6 7 6. Installation The voltage supply to which the machine is to be connected must be within range shown on the machines specification label. The fuse rating must be 13A. Any re-wiring must only be carried out by a qualified elect ...

• Check the wheel dimensions: the outer diameter must not exceed recommended measurement and the hole must be correct as specified on the machines specification plate. The wheel should easily slide on to the spindle shaft and must never be forced on with pressure. • Before mounting a wheel, it must be checked for flaws and damage. T ...

Spark Shield Spark Arrestor Motor Housing Grinding Wheel Wheel Guard Base Start/Stop Switch Tool Rest Lock Tool Rest Flexible Arm Light Grinding Wheel ...

Item Description 1 Eye shield support 2 Screw M5*45 3 Washer 5 4 Washer 5 5 Nut M5 6 Protective cover 7 Motor guard 8 Nut M12 9 Screw M5*15 10 Flange 11 Stone washer 12 Grinding wheel 13 Screw 14 Screw M5*20 15 Protective lid (left) 16 Tool rest (left) 17 Washer 8 18 Washer 6 19 Washer 6 20 Knob 21 Mounting bracket 22 Screw M5*8 ...