Record Power BS250 Instruction Manual

instructions carefully before assembling or using this product. Save this manual for future reference. Compact Bandsaw BS250 ...

Health & Safety Guidance page 4 Additional Safety Instructions For Bandsaws page 5 Record Power Guarantee page 6 EU Declaration Of Conformity page 31 User Manual 1. Getting To Know Your Bandsaw page 7 2. Machine Specification page 7 3. Stand & Wheel Kit Assembly page 8 4. Machine Assembly page 12 5. Machine Setting page 15 6. Ban ...

CAREFULLY BEFORE ASSEMBLY, INSTALLATION AND USE OF THIS PRODUCT. KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE. WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury. SAFE OPERATION 1. Eye Protection The ope ...

COMMON SENSE AND ALERTNESS AT ALL TIMES WHEN THE BANDSAW IS BEING USED. WARNING: FOR YOUR OWN SAFETY, DO NOT ATTEMPT TO OPERATE YOUR BANDSAW UNTIL IT IS COMPLETELY ASSEMBLED AND INSTALLED ACCORDING TO THE INSTRUCTIONS. SAFE OPERATION 1. The bandsaw should be bolted to a workbench or suitable stand where possible. 2. If you ...

1. INTRODUCTION 1.1 We supply machinery through a network of dealers and authorised distributors and you should be aware that your contract of sale is with the retailer from whom you purchased this product. 1.2 If you are not satisfied with this product you should in the first instance approach the retailer from whom you purchased it. ...

Fig.1 A Blade Tensioning Knob B Rise & Fall Lock C Blade D Upper Blade Guide E Mitre Fence F Rip Fence G Rip Fence Rail H Table I Stand & Wheel Kit (optional) J Rise & Fall Knob K Tracking Knob L Tracking Knob Lock M Motor Rating Plate N Table Tilting Handle O 100mm Dust Extraction Port P Motor 6 7 A B ...

3.1 Stand & Wheel Kit Assembly CAUTION! The machine is heavy. Additional help or a suitable lifting device or support will be required for lifting the machine onto the stand. The stand and wheel kit comes as a self assembly unit Fig.3.1. Stand 1. 2 x Long top brace supports 2. 2 x Short top brace support 3. 2 x Long m ...

Note: When assembling this legstand Do Not fully tighten the nuts and bolts until the assembly is complete. Finger tight should be sufficient. 3.2 Stand Assembly 1. Locate the first leg and secure it to one of the long top brace supports using the nuts, bolts and washers supplied Fig.3.2 and Fig.3.2B. 2. In th ...

3.3 Wheel Kit Assembly 1. On the underside of the operating frame, feed the short stem wheels through the pre-drilled holes and secure with one of the pins and washers provided Fig.3.9. 2. With the operating frame in hand, attach the release pedal to the underside of the operating frame using the 3 Phillips he ...