Matsui MUL1308GS Instruction Manual

NO SE FI DK FRITTSTÅENDE KJØLESKAP INSTRUKSJONSHEFTE UNDERBYGGNADSKYL BRUKSANVISNING KYLMÄKAAPPI KÄYTTÖOHJE PROVIANT UNDERSKAB BRUGSANVISNING UNDERCOUNTER LARDER INSTRUCTION MANUAL MUL1308GS-GSE MUL1308GW-GWE ...

carry out servicing or repairs which involves the removal of covers. To avoid the risk of an electric shock do not attempt to repair this appli- ance yourself. If the supply cord is damaged it must be replaced by the manufacturer, its service agent, or similarly qua ...

Before Use Please read these instructions carefully before using your new Matsui appliance. The appliance is for indoor and domestic use only. Bottle Storage Levelling Feet (behind kick strip) Salad Bin Adjustable Shelf Glass Shelf Internal Light and Thermostat Control Dial ...

the floor is flat and firm, and the room is well ventilated with an average room temperature of between 16ºC and 32ºC. Locate the appliance away from direct sunlight and source of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coati ...

DO NOT SWITCH ON UNTIL TWO HOURS AFTER MOVING THE LARDER. The coolant fluid needs time to settle. • Ensure the appliance is un- plugged and empty. • Adjust the two leveling feet to their highest position. • We recommend you have someone to assist you. Tools required • Phillips style screwdriver • Flat bladed screwdriver ...

from the unit. 4. Remove the top hinge pin inside the door and refit on the opposite side. 5. Slide the door back on to the top hinge. Screw the bottom hinge into place on the new side. 6. Check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tig ...

1. Before connecting the appliance to the mains supply make sure that the Thermostat Control Dial is set at position 0. This is located on the right inside of the cabinet. 2. Turn the thermostat knob clockwise to set it to the desired position, bear in mind that the higher the number, the colder th ...

If you are at all concerned that your appliance is not being kept cold enough, or you occasionally wish to check the temperature, you can purchase a Fridge/Freez- er thermometer. These are available from most supermarkets and hardware shops. Place the thermometer in the coldest part of your appliance (located ...

This allows could air to circulate around the appliance, ensuring all parts of the appliance are kept cool. Wrap up food! To prevent transfer of flavors and drying out, food should be separately packed or covered. Frit and vegetables need not be wrapped. Pre-cooked food should be cooled properly Always let pre-cooked food cool ...