Amit AMR-OP70C Series Operation Manual

1. Release the cover by pressing a latch on the on-wall controller's left side (for example, with a screwdriver or a blunt-tip). Then take off on-wall controller front part. Fig. 8 - Place that must be pressed with blunt-tip 2. Mount rear cover on a selected location. There are two pairs of mou ...

Amit AMR-OP70C Series  ARION,  MODBUS. Fig. 29 - Communication protocol selection Number Description 1 Protocol selection Net. Type Legend ...

Amit AMR-OP70C Series Fig. 16 - Icon for mode variant 1 Number Description 1 Comfort mode 2 Energy saving mode 3 Auto mode Three icons are displayed for room mode. Highlighted icon indicates selected room mode. Mode is activated by pressing particular icon. Icon Mode Description Comfort Is regulated to con ...

Amit AMR-OP70C Series chapter 6.1. Basic screen). Fig. 33 - Variant selection Number Description 1 Variant selection Legend ...

Should be placed around 1.5 m above the floor, in an area with good and innate air circulation. Controller should not be placed in area, where its temperature can be affected by the wind, sunshine, heat radiation from the heater, or ...

Amit AMR-OP70C Series Following data is displayed: Status Description Reset Controller was restarted. No communication took place since the restart. Error Communication error. Time longer than Guard Time elapsed since last communication Menu Flawless operation of the unit. Fig. 11 - Measured temperature Display of mea ...