D-Link DXS-3326GSR - xStack Switch - Stackable Reference Manual

Command Line Interface Reference Manual First Edition (July 2004) 651XS3326015 Printed In Taiwan RECYCLABLE ...

(All countries and regions excluding USA) Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient ...

PRODUCT DOES NOT EXIST OR WAS CAUSED BY THE CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LI ...

or entity that originally purchased the product from: � D-Link or its authorized reseller or distributor and � Products purchased and delivered within the fifty states of the United States, the Distri ...

be rejected by D-Link or become the property of D-Link. Products should be fully insured by the customer and shipped to D-Link Systems, Inc., 53 Discovery Drive, Irvine, CA 92618. D-Link will not be held responsi ...

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, ...

Introduction............................................................................................................................................ 1 Using the Console CLI............................................................................................................................. 4 Command Syntax........................ ...

Time and SNTP Commands................................................................................................................. 255 ARP Commands ........................................................................... ...

1 INTRODUCTION The Switch can be managed through the Switch’s serial port, Telnet, or the Web-based management agent. The Command Line Interface (CLI) can be used to configure and manage the Switch via the serial port or Telnet interfaces. This manual provides a reference for all of the commands contained in the ...

Setting the Switch’s IP Address Each switch must be assigned its own IP Address, which is used for communication with an SNMP network manager or other TCP/IP application (for example BOOTP, TFTP). The Switch’s default IP address is 10.90.90.90. You can change the default switch IP address to meet the specifica ...