Haier YR-E17 Operation & Installation Manual

•  Please read this operation manual before using the air conditioner. •  Please keep this manual carefully and safely. CONTENT Parts and Functions���������������������������������������������������� ...

adjustment, temp. compensation and energy saving; Inquiring key for detail parameter and malfunction inquiry; Switching key for function switch. The adjusting accuracy of temperature is 0.5°C (1°F). If energy saving mode is not set, the adjusting range is from 16°C (60°F) to 30°C (86°F). If ...

is no Central/Lock set, the temp. will be fixed at 18°C (64°F) in cooling and 22°C (72°F) in heating. The Up/Down key will not display in normal state, but will display and valid in timer setting, function selection, unit shift in malfunction inquiry, parameter shift in parameter ch ...

follows: (Low) → (Medium) → (High)→ (Auto) → (Low) Note: Auto fan will be changed in sequence as follows: → → → Pressing this key, fan speed will be changed in sequence as follows (Only valid for parts of models): (Breeze) → (Low) → (Medium) → (High) → (Super) → ...

Press this key to enter function circulation. If it is the four- way cassette model, press Set key for 5s to enter function circulation. 1.Press to select the functions in sequence as follows: (Only when Left/Right swing is valid) → (Only when Up/ Down swing is valid) → → (ventilation function) → (reserved fu ...

health airflow down (Only valid for part of models) → health airflow up (Only valid for part of models) →10°C heating function (this function only works in the heating mode, only valid for part of models) → (motion sensing,only valid for part of models) → (the second 8 of 88.8 in the temp. ...

Icon Clock; Parameter setting/inquiry; Malfunction display; Mode setting. Timer ON/OFF: Sleeping; Parameter setting/ inquiry; Malfunction display. ROOM/SET temp. and humidity display, each step is 0.5°C (1°F) . For example, if the temp. is 25°C (77°F), it will display 25.0°C (77°F). Humidity display function is reserved. Energy Sa ...

Sleeping. This icon is displayed when setting the sleeping, and left time of sleeping is displayed by Heat Reclaim Ventilation, This icon is displayed when setting the heat reclaim ventilation. Electrical Heating. This icon will display when electrical heating is set on DC wired controller. Intelligent Mode. Cooling Mode. Heating Mode. ...

Operation DIP switch On/Off station Function Default setting Sw1 On Slave wired controller Off Off Master wired controller Sw2 On Ambient temp. display on Off Off Ambient temp. display off Sw3 On Collect ambient temp. from PCB of indoor Off Off Collect ambient Temp. from wired controller Sw4 On Non-volatile memory invalid ...