SpaNet SV SmartStream Operation & User’s Manual

SmartSTREAM Stereo Operation Power On/Off Press and hold the Power On/Off button for 4 seconds to turn the power ON or OFF. Touchpad Key Assignments Key Press Operations There are two key press operations as follows. Single key press – the key is pressed and released. The function operates when the key is released. Hold and tap – the hol ...

SpaNet SV SmartStream Step 5: If you have just completed your user account registration your app will already be logged in at the spa list screen (refer below) If you do not see the above screen, please open the app and login with your username and password entered during registration. Step 6: Press on NEW DEVICE to add your spa to your spa list Step 7: Your di ...

SpaNet SV SmartStream Edit Spa List Press on the pencil to edit your spa. You can rename the spa or delete it. To rename your spa just click on the spa name and edit it as required. Press on SAVE to save the new name, or press CANCEL to exit the edit box without saving. Press on DELETE to delete your spa from the list (you may do this if the configuration proces ...

SpaNet SV SmartStream NOTES FOR REGISTERING A USER ACCOUNT: 1) If your chosen username has already been taken a “MEMBER EXISTS” error will appear once you click REGISTER. Enter a different username and try again. 2) Only one user account can be registered to an email address. If you attempt to register multiple accounts with the same email address a “MEMBE ...

SpaNet SV SmartStream Overview The SV SmartSTREAM controller is an all in one, purpose built, high definition sound system for your spa with Bluetooth® connectivity that also includes a WiFi module for remote access control of your SV Series spa control. The controller has been designed from the ground up specifically for spa pool applications and built to withs ...

Contents Overview ........................................................................................................... 3 Keypad Overview ............................................................................................. 3 SmartSTREAM Stereo Operation .......................................................................... ...

SpaNet SV SmartStream Unpair / Disconnect Bluetooth Connection If you wish to unpair/disconnect the current Bluetooth connection so that a different smart device can be paired use the Hold & Tap function. Hold MODE (key 8) and Tap SKIP TRACK + (key 7) to unpair the connection. HOLD + TAP Volume Control Audio volume is a combination of the audio sourc ...

SpaNet SV SmartStream The wireless network list displays a list of the wireless network SSIDs discovered in proximity to the spa after the WiFi scan. The signal strength of each network is detailed on the right hand side in decibels (db). A basic guide to WiFi signals strengths is as follows: -120db is unacceptable -100db is poor, often unstable but usable -80db ...

SpaNet SV SmartStream Loudness The maximum volume can be boosted by activating the loudness feature via the keypad. When loudness is turned on certain frequencies are boosted, particularly the treble. Whilst the overall volume will be increased the general sound quality will become thinner and not as rich. For best audio quality and richness of sound the Loudnes ...

Hold & Tap Key Functions FUNCTION HOLD KEY TAP KEY NOTES Bluetooth Connect 8 6 Attempts to reconnect to last connected device Bluetooth Disconnect 8 7 Kill current Bluetooth connection Bluetooth Volume (+) 8 2 Increases Bluetooth module volume Bluetooth Volume (–) 8 3 Decreases Bluetooth module volume Loudness (on/off) 1 6 Low beep = off, ...