Kenwood KTI-3 Service Manual

File Specifications

Brand: Kenwood
Category: Recording Equipment
Model: KTI-3 (Service Manual), prLOKdMINVwkw
File Info: Adobe Acrobat PDF (DjVu)
File Size: —
Pages: 16 pages

Download PDF

Download Kenwood KTI-3 Manual (16 pages)

Read Online:

Read the Kenwood KTI-3 Service Manual online using the built-in PDF viewer.

Key Pages of Document

NETWORK INTERFACE UNIT

KTI-3 SERVICE MANUAL © 2010-8 PRINTED IN JAPAN B51-8928-00 (Y) 412 Badge (B43-1652-04) NETWORK INTERFACE UNIT Metallic cabinet (A01-2229-02) Lead wire with connector (E37-1526-15) Chassis (A10-4145-02) Lead wire with connector (E37-1527-05) CONTENTS GENERAL ................................................................ 2 REALIGNMENT ...

Copyright 2010 by Kenwood Corporation. All rights re-

served. No part of this manual may be reproduced, translated, distributed, or transmitted in any form or by any means, elec- tronic, mechanical, photocopying, recording, or otherwise, for any purpose without the prior written permission of Ken- wood. Disclaimer While every prec ...

● Transceiver (NXR-710/810) + KTI-3

2. How to Enter Each Mode 3-3. Programming The firmware of the KTI-3 is stored in the NXR-710/810, and installed in the KTI-3 as necessary. Conditions of the NXR-710/810 installing the firmware in the KTI-3. • When the firmware besides the firmware of the KTI-3 that the NXR-710/810 stores i ...

1. Indicators (PWR STATUS)

Rear Panel Indicators (LAN) Indicators 2. Indicators (LAN) ■ Reference drawing for mounting hardware 42.5 (1.67) 40 (1.57) 42.5 (1.67) mm (inch) M3X8MAX DISASSEMBLY FOR REPAIR 1. Remove the cabinet from the chassis 1. Remove 4 screws a and 6 screws b. 2. Remove the cabinet from the c ...

1. MCU circuit

The MCU (IC10) 32bit microcontroller includes a 98kbit chip SRAM. 2. Memory circuit The flash memory has a capacity of 8Mbit (IC11) and 32Mbit (IC12). 3. Power supply circuit The Power supply circuit consists of IC3 and IC7. IC3 is a DC/DC converter and supplies 3.3V. IC7 supplies 5.0V. 4. LAN interface circuit Thi ...

◆ New Parts. indicates safety critical components.

Parts without Parts No. are not supplied. Les articles non mentionnes dans le Parts No. ne sont pas fournis. Teile ohne Parts No. werden nicht geliefert. KTI-3 INTERFACE UNIT (X46-3370-20) L : Scandinavia K : USA P : Canada Y : PX (Far East, Hawaii) T : England E : Europe C : Chin ...

INTERFACE UNIT (X46-3370-20)

Ref. No. Address New parts Parts No. Description Desti- nation L13 ✽ L92-0639-05 CHIP FERRITE L15 -17 L92-0467-05 CHIP FERRITE L19 -22 L92-0467-05 CHIP FERRITE L23 ,24 L92-0639-05 CHIP FERRITE L31 L92-0639-05 CHIP FERRITE L33 -35 L92-0467-05 CHIP FERRITE X2 L77-3067-05 CRYSTAL RESONATOR(25MHZ) X4 L77-2951-05 ...

Note 1: This part cannot be replaced. Therefore, this part is not supplied as a service part.

8 INTERFACE UNIT (X46-3370-20) Ref. No. Address New parts Parts No. Description Desti- nation IC3 ✽ LT3685EMSE ANALOGUE IC IC4 TC7WT125FUF MOS-IC IC5 ADM101EARMZ MOS-IC IC6 E-STE100P MOS-IC IC7 NJM78M05DL1AZB ANALOGUE IC IC8 XC6108N31BM-G ANALOGUE ...

When replacing the LED, bend the leg of

the LED at 4.0 mm (0.16 inches). D11, D12 11 Cx2 701 PCB 2 4.0 mm (0.16 inches) X46 CN10 15 15 Cx3 X46 D11 D12 J21 J20 Interface unit 12 (X46) 10 3 3 708 2 9 701 7 702 A : N35-2605-43 B : N35-3005-43 C : N87-2606-48 Parts with the exploded numbers larger t ...

706 Item carton box

1 705 Protection bag 8 Modular cable (E30-7717-05) 13 Cushion (G13-2338-04) 14 Cushion x4 (G13-2339-04) 2 6 Instruction manual (B62-2283-10) 704 Protection bag 703 Packing fixture 3 Parts with the exploded numbers larger than 700 are not supplied. ...

Kenwood KTI-3 user guide recommended for: G-EQ300, KRK-18H, DM-5090, 1050MD, DX-7.

⚠️ Download Safety

The Recording Equipment Service manual (16 pages) is completely safe to download (last scan date: 28/08/2026).

Related PDF Instructions for Kenwood KTI-3: