Metabo RB 18 LTX 60 Operating Instructions Manual

en Operating Instructions 5 fr Mode d'emploi 10 es Instrucciones de manejo 16 RB 18 LTX 60 RBE 9-60 all-guides com ...

RBE 9-60: 0 I C B A 1 2 3 4 5 6 7 8 9 10 11 12 13 12 13 14 11 7 8 9 10 18 V...3,0 Ah ... 6.25455 18 V...4,0 Ah ... 6.25527 18 V...5,2 Ah ... 6.25587 2 ...

E F Ø Ø 40 mm ... 60 mm ... ... Ø Ø 20 mm ... 40 mm 1. 2. 3. 4. 15 16 17 D 3 ...

RBE 9-60 U V 18 - I120 V A - 8 P1 W - 900 P2 W - 470 BB mm (in) 20-30 (25/32 - 1 3/16) 20-30 (25/32 - 1 3/16) BL mm (in) 533 (21) 533 (21) D mm (in) 20 - 60 (25/32 - 2 3/8) 20 - 60 (25/32 - 2 3/8) Ua, max ° 190 190 v0 m/s 9,2 8,0 - 14,0 m kg (lbs) 3,3 (7.3) 3,1 (6.8) 12. Metabowerke GmbH, Postfach 1229 Metabo-Allee 1 D-72622 Nuertingen German ...

texturing, polishing and smoothing steel pipes without the use of water. The user bears sole responsibility for any damage caused by improper use. Generally accepted accident prevention regula- tions and the enclosed safety information must be observed. For your own protecti ...

preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) ...

be held firmly. We recommend using a stationary extractor system and connecting a residual current circuit-breaker (FI) upstream. When the machine is shut down via the FI circuit-breaker, it must be checked and cleaned. For information on cleaning the motor, see chapter 7. Cleaning. 3.2 Special s ...

flat and must be recharged. Removing and inserting the battery pack To remove: Press the battery pack release button (4) and pull the battery pack (1) downwards. To fit:Slide in the battery pack (1) until it engages. 5.3 Turning the sanding head (10) to operat- ing position - Open the release ...

start. The restart protection is active. If the mains plug is inserted with the machine switched on, or if the current supply is restored following an inter- ruption, the machine does not start up. Switch the machine off and on again. 8.2 Cordless machines - The electronic signal display (5) lights up a ...

structurage, polissage et lissage de tubes en acier inoxydable sans utilisation d'eau. L'utilisateur est entièrement responsable de tous dommages résultant d'une utilisation non conforme aux prescriptions. Il est impératif de respecter les directives de prévention des accid ...