Amit KS-611M Assembly Manual

3.1. System description KS-611M is a digital IP camera system. All cameras and monitors communicate via Ethernet line. System functionality is determined by software used in IP monitors and re- cording unit. To look over layout of individual components within the vehicle see the AP- PENDIX A – Location ...

Amit KS-611M publication and reserves the right to change the documentation without obliga- tion to inform anybody or authority about it. This document can be copied and redistributed under following conditions: 1. The whole text (all pages) must be copied with ...

Amit KS-611M Until restart of recording unit the new version of application does not manifest itself. Restart is performed by power supply off and on via SB control signal. Verifying version of loaded application Version of application which is loaded in recording unit you can get from re- sponse to http request. ...

Amit KS-611M Switch the recording unit power supply on. Wait for performing operations, that are involved in recording procedure. Both operations are indicated by blinking of keyboard LED. Because performing of service operations takes about 5 minutes, pay an appropriate attention to LED indicators.  Forma ...

Directory File Description flashdisk-pesa611m-130807.img.zip flashdisk-pesa611m-130807.img OS image file img2usb.exe Image burner AmitDeviceDetection_104 AmitDeviceDetection.exe Configuration tool PPMFormatStorage_100 commands.sh Command file plink.exe Application file PPMFormatStorage.odt Help fi ...

Amit KS-611M Press the Connect button. Deleting of previous application files Identify, in which window have been displayed files from connected monitor (according to heading - see figure), and delete them. Fig. 13 - TC – Identification of FTP contents Copying of new application files Copy the n ...

Amit KS-611M When putting system into operation, we suppose: all system components are properly mounted and capable of operating. Power supply voltage is properly connected to all units Ethernet infrastructure must is properly installed and all powering and communication cables are attached to units. For proper oper ...

New window will show. Fig. 5 - Adjust the AIPM identification mode Click on the button Continue and wait about 45 seconds. On the selected IP monitor you will see „AMiT display device VISUAL identification mode“ graphic. ...