BW Technologies MicroClip XT Quick Reference Manual

displays • During normal operation Err displays Confidence Beep and IntelliFlash • One beep and flash every second Note: Confidence Beep and IntelliFlash automatically deactivate during low battery alarm, self-test fail, calibration fail, bump test ...

BW Technologies MicroClip XT GasAlertMicroClip XT, XL and X3. For complete operating instructions, refer to the GasAlertMicroClip User Manual from www.honeywellanalytics.com. The GasAlertMicroClip (“the detector”) warns of hazardous gas at levels above user-de ...

BW Technologies MicroClip XT 16 2. Connect the charging adapter to the detector IR interface. 3. Charge the battery. 4. Charge the battery after each workday. Maintenance To maintain the detector in good operating condition, perform the following basic maintenance as required. • Calibrate, bump test, and inspect the detector on a regular schedul ...

BW Technologies MicroClip XT 8 • Alcohol based cleaners • Hand sanitizers • Anionic detergents • Methanol (fuels and antifreezes) Silicones • Silicone cleaners and protectants • Silicone based adhesives, sealants, and gels • Hand/body and medicinal creams containing silicone • Tissues containing silicone • Mold releasing agents � ...

BW Technologies MicroClip XT GasAlertMicroClip XL: 14-KB4BO-0659X2 GasAlertMicroClip X3: 15-KA4BO-0307X3 Manufacture: RAE Systems (Shanghai) Inc. Address: 990 East Huiwang Road, Jiading District, Shanghai, China 201815 Tel: =86-21-69522616 This equipment has been tested and found to ...

BW Technologies MicroClip XT • To deactivate the detector, press and hold C until the OFF countdown is complete and the LCD deactivates. • To view the TWA, STEL, and MAX (maximum) readings, press C twice. To clear the TWA, STEL, and MAX readings, press C when the LCD displays RESET. • To initiate cali ...

5 Parts of the GasAlertMicroClip 8 6 9 4 5 3 7 10 11 2 2 1 2 Item Description 1 IntelliFlash 2 Visual alarm indicators (LEDs) 3 Alligator clip 4 Charging connector / IR interface 5 Pushbutton 6 Carbon monoxide (CO) sensor 7 Hydrogen sulfide (H2S) sensor 8 Oxygen (O2) sensor 9 Combustible (LEL) sensor 10 Audibl ...

BW Technologies MicroClip XT 15 • Cal Lock: When enabled, the sensors can only be calibrated using an IR device (IR Link with Fleet Manager II or the MicroDock II base station). • Force Bump When Overdue: When enabled, a bump test is required if the sensor has exceeded its bump test interval. If a successful bump test is not perfor ...

BW Technologies MicroClip XT 14 User Options Menu To modify the user options, connect the detector to the IR Link adapter and open Fleet Manager II. Refer to the Fleet Manager II Operator’s Manual for complete instructions. 1. Sensors (H2S, CO, LEL, and O2) • Sensor Disabled: Disables the sensor. • Calibration Gas (ppm) / (%LEL) / (%O2): Def ...

BW Technologies MicroClip XT 22 XT Model XL & X3 Models Specifications Instrument dimensions: XT: 11.25 x 6.00 x 2.89 cm (4.4 x 2.4 x 1.1 in.) XL-X3: 11.25 x 6.00 x 3.22 cm (4.4 x 2.4 x 1.2 in.) Weight: XT: 170 g (6.0 oz.) XL: 190 g (6.7 oz.) X3: 179 g (6.3 oz.) Operating temperature: -4°F to +122°F (-20°C1 to +50°C), Storage temperature: -40� ...

BW Technologies MicroClip XT 4 • Sur cet appareil, seule la détection de gaz combustibles a fait l’objet d’une évaluation des performances par CSA International. • Veillez à effectuer l'étalonnage dans une zone sûre, exempte de gaz dangereux, et dans une atmosphère contenant 20,9 % d'oxygène. • Si le capteur de gaz combustibles a ...

24 Year of manufacture: The detector's year of manufacture is determined from the serial number. The second and third number after the first letter determines the year of manufacture. E.g., KA410-001000 = 2010 year of manufacture Approved batteries: Approved batteries for GasAlertMicroClip XT: Narada NL 503759 Approved ...