ATCOM AXE2BL Product Manual

www.atcom.cn Content CHAPTER 1 THE INTRODUCTION OF AXE2BL............................................................................................1 CHAPTER 2 HARDWARE INTRODUCTION..................................................................................................2 CHAPTER 3 TEST ENVIRONMENT...................... ...

www.atcom.cn Contact ATCOM The Introduction of ATCOM ATCOM is the leading VoIP hardware manufacturer in global market. We have been keeping innovating with customer’s needs oriented , working with partners to establish a total solution for SMB VoIP with IP phone , IP PBX and Asterisk cards. With over 10 years’ experience of ...

Overview of the AXE2BL AXE2BL Asterisk card is the telephony PCI-E card which supports dual ISDN BRI ports. Using AXE2BL digital BRI card, open source Asterisk PBX and stand alone PC, users can create their IP PBX telephony solution included all the sophisticated features of traditional PBX, and extended features such a ...

www.atcom.cn 2 Chapter 2 Hardware Introduction TE/NT Setting: Each port can work in TE or NT mode independently. By default, all of the ports are set to TE mode, because the telecom side always use NT mode, and users should use TE mode. The components of C4, C5 and C2 are used for setting TE/NT mode. For example, in the followin ...

www.atcom.cn 3 C2 C1 C4 To set up the C1 component, customer should use a jumper to connect two pins, the 1,2,3,4 are used to set port1, port2, port3, port4 orderly and independently. If users do not use ISDN phone, please do not set the C1 component. C1 LED: If the driver of the card is loaded correctly and the /etc/dahdi/syste ...

www.atcom.cn 4 Chapter 3 Test Environment Test Environment: Libpri-1.4.7 dahdi-linux-complete-2.6.2+2.6.2 asterisk-1.8.7.1 Centos6.0 (kernel version: 2.6.32-279.22.1.el6.i686) AXE2BL ...

www.atcom.cn 5 Chapter 4 Software Installation After inserting the card into the PCI-E slot and boot the server, please use the “lspci” command to check the PCI-E bus compatibility. From the correct output, users can see the following line: ------------------------------------------------------------------------------------- ...

www.atcom.cn 6 3. Install libpri 1) [root@localhost src]# tar -xvzf libpri-1.4.12.tar.gz 2) [root@localhost libpri-1.4.12]# make 3) [root@localhost libpri-1.4.12]# make install 4. Install dahdi-linux-complete 1) [root@localhost src]# tar -xvzf dahdi-linux-complete-2.5.0.1+2.5.0.1.tar.gz 2) [root@localhost src]# cd dahdi-linux-co ...

www.atcom.cn 7 Chapter 5 Software Configuration 1. Please use cat /proc/interrupts command to check if the driver of AXE4BL is loaded or not, if the AXE4BL driver is loaded correctly, users can get one line with wcb4xxp 20: 2310670 2218516 IO-APIC-fasteoi wcb4xxp If users can not get the line above, but users can get one line wi ...