SC&T Livewire TS+ Operation & User’s Manual

SECTION 1: GENERAL INFORMATION 1.1 Device Firmware & Tune Revision Updates .......................................................pg. 4 1.2 About Your SCT Device .....................................................................................pg. 4 SECTION 2: GETTING STARTED 2.1 Powering On the Livewire TS+ .......................... ...

Air Act if such alterations bypass, defeat, or render inoperative Elements of Design installed on a vehicle in compliance with the Clean Air Act. Users who alter Derive’s products in any way are required to make their own individual determination ...

1.1 DEVICE FIRMWARE & TUNE REVISION UPDATES From time to time, you may wish to update your device to the latest version of firmware or tune revision. For step by step instructions on how to update your SCT device visit www.sctflash.com/support. Make sure you have returned your vehicle back to stock before updating your unit. ...

2.1 POWERING ON THE LIVEWIRE TS+ There two ways to power on the device. If you would like to flash your vehicle, you will need to use the vehicle instructions below. If you are looking to update or load custom tunes onto your device you will use the Computer instructions below. USING THE VEHICLE 1. Locate the vehicle’s OBD II p ...

2.2 LOADING EMAIL CUSTOM TUNES TO THE LIVEWIRE TS+ 1. Before connecting your LWTS+, Install SCT Device Updater www.sctfl ash.com/support. 2. Connect your device with the USB cable provided to your computer. (Allow about 30 seconds for the drivers to install). 3. Save your custom tunes from your email to your desktop. 4. Open SCT ...

2.3 MENU NAVIGATION PROGRAM VEHICLE • Return to Stock • Strategy Tunes • Custom Tunes GAUGES / DATALOG • Configuration • Monitor DIAGNOSTICS • Read DTC • Clear DTC PERFORMANCE TESTS • 0-60 MPH • ¼ Mile • Braking VEHICLE INFO • Vin • Strategy • Vehicle Weight DEVICE SETTINGS • LCD Brightness Day Time � ...

2.4 USING THE TOUCH SCREEN The screen on the Livewire TS+ is pretty simple to use, simply use your index finger to scroll through the sub-menu options by pressing firmly on the screen of the LWTS+. When you see the menu you would like to choose, press firmly on the icon with your finger. If you’d like to back out of a ...

3.1 INSTALLING A PRELOADED TUNE FILE 1. Connect the Livewire TS+ to your vehicle’s OBD II port and power on the device by pressing down on the power button in the upper right hand corner of the device as you are looking at the screen. 2. Start with the unit powered on and connected to the vehicle, press the “Program ...

3.1 INSTALLING A PRELOADED TUNE FILE Which tune file do I choose? GASOLINE ENGINE: Tunes are based on Octane, make sure you choose the correct octane rating based on the octane you are running in your vehicle. • 87 Octane • 91 Octane • 93 Octane DIESEL ENGINE: We offer a few tunes based on what you’re going to b ...