Sharper Image 204939 Owner's Manual

Carefully unpack package contents to make sure all parts are present Some assembly is required. @(¥)8@ 8® GGGG (1) Remote (1) Ground Stake with Attachment Screw (1) 2-Prong Adapter (1) Allen Key (1) Light Projector DO NOT PLUG IN LASER UNIT UNTIL PROMPTED IN THE STEPS BELOW If you already have, unplug it now and follow the steps below in ...

Assembly diagram 2 First, install the included two 3A battery in the remote. To test the remote's battery connection, press any button and the LED will illuminate for 1 second. If the LED does not illuminate, check to make sure you have installed battery according to the correct polarity. Retra ...

standby Mode after# hours. Timer settings will be saved until "timer reset" button is pushed or if the projector unit is unplugged. A triple-flash indication from the projector will confirm your timer setting. 6. Timer reset: Press this to reset and turn off the timer. SYNCING THE ...

outlet. • Do not use with dimmers. • Operate in temperatures of -26 °C to 32°C (-15 °F to 90 °F). There will be a delay if operating at a temperature of -26 °C {-15 °F). Please allow up to 10 minutes for light to warm up and reach its full projection. • When hanging ...

©Sharper Image All Rights Reserved. WARRANTY / CUSTOMER SERVICE Sharper Image branded items purchased from SharperImage.com include a 1-year limited replacement warranty. If you have any questions not covered in this guide, you may call ...