PSI Matrix PP 408 Operation & User’s Manual

Uwe Panthel - PSi Customer Support . A Publication of Psi Matrix GmbH Hommeswiese 116 57258 Freudenberg, Germany http://www.psi-matrix.eu Copyright © September 2018 by PSi Matrix GmbH Great care has been taken to ensure that the information in this handbook is accurate and complete. However, should any errors or omissions be disc ...

PP 408 (High Speed Fanfold Printer with Cutter) fulfils the safety regulations according to EN 60950- 1, UL 60950-1 and CAN/CSA 22.2/No. 60950-1 for Information Technology Equipment. The mains cable must be connected to a ground protected wall-socket. The indicated voltage of the pri ...

• Printer PP 407 (High Speed Fanfold Printer) and • Printer PP 408 (High Speed Fanfold Printer with Cutter) corresponds to the law regulations ruling electromagnetic compatibility of appliances (2004/108/EC) and, therefore, fulfils the requirements for conformity marking with the CE-si ...

• Temperature: + 10°C to + 35°C (+50°F to +95°F) • Humidity: 20% to 80% Slots and openings in the printer‘s housing are provided for ventilation. Always ensure that these openings are not obstructed. Also ensure that the cables at t ...

This manual is covering the two printers • High Speed Fanfold Printer • High Speed Fanfold Printer with Cutter The operation and functionality are nearly the same. In most illustrations, the High Speed Fanfold Printer with Cutter is used. In case there are differences in the handling you will find the note: • ...

systems and explains particularities depending on the version of the operating system. Additionally, cable connection is illustrated B Print examples of the standard fonts C Character Set Tables All printer supported charac ...

The following conventions are used: Bold Headlines and important information. Note: Contains special advice to facilitate handling. Caution: Contains important information to prevent damage of the equipment. Attention: Information that requires special attention [ENTER] Key functions are always depicted in bracket ...

2.1 Unpacking High Speed Fanfold Printer (Content PP407) Check each item against the check list detailed below. Contact your reseller immediately if any item is missing or damaged. The printer package should contain the following parts: • 24-Needle Printer (1) • Ribbon cassette (2) • Powercord (3) • Quick Referenc ...

Before installing the printer, spend some time familiarizing yourself with the printer. Top cover (1) Power cord socket (6) Ribbon cassette (2) Control panel (7) Printer base (3) Interface serial, parallel, USB (8) Tractor cassettes (4) Tear off edge (9) Power switch(5) ...