MAYFIELD SPORTS Premier Hockey Goal Installation Instructions

The following instructions must be followed to ensure that this Mayfield Sports Premier Hockey Goal System is not damaged during installation and that all parts are correctly installed. Mayfield Sports will not be held liable for any damage caused by incorrect or careless installation. If you have any questions r ...

• Loosely bolt front crossbar to both side frames with 4x M12x30mm bolts and washers as shown below. Note: The front crossbar (only crossbar with band edge for attaching net) should be lying on the ground with the band edge facing towards the rear of the goal ...

Once the shaft is flush with the outside of the wheel, attach wheel spacer (with the smaller circular side fitting inside the wheel housing). • Fix wheel to shaft with 1x M12x30mm bolt and washer. • Firmly tighten with 8mm Allen key, make sure bolt is suffic ...