KANDA STK200ICE Quick Start Manual

STK300ICE Introduction This package consists of a number of different elements, each of which has its own documentation. This guide is an overview of how to setup and use the package. For details on each part, please consult the relevant documentation on the CD. Package contents • Get Going with AVR… book ...

Compiler is included for those who want to progress beyond assembly language but we recommend that you get a book on using C on the AVR before starting with the compiler. Getting Started The place to start is by reading the book. The first half of the book covers the basics ...

guide in the directory, which contains instructions on how to install AVR Studio. 3) Once AVR Studio is installed, run the AVR Studio program. 4) Select the folder Studio4 > Documentation on the CD Open the file ToolsSetupStudio4.pdf and follow the instructions in th ...

• Connect the 10-way lead labelled ISP only to the PC adapter or dongle and plug the dongle into your printer port. • Connect the other end of the lead to the ISP header on the STK200 board • Power the STK200 board – 9-15VDC Run AVRISP from the Tools menu PC Printer Port On- Off Switch Power Supply connector ...

• Create a New Project in AVR Studio, and give it a name. Note the path to the project. • Uncheck “Create Initial File” • On next screen, select Debug Program as JTAG AVR and Device as ATmega162 (STK300ICE – Atmega128) and click finish • Go to Project menu > Add Existing File and open bincount200.asm from C ...

questions about the JTAG AVR, the answer should be in these files. Connecting the JTAG AVR hardware. • Connect the serial lead to the PC and the JTAGAVR main board • Connect Adapter A (the one with the big letter A on it) to the JTAGAVR using 10- way lead – not lead mar ...

This should be really easy. Reopen the Bincount project if you have closed it. Now go to Debug menu > Start Debugging You can use Step, breakpoints and run to navigate through the code. This is just a brief introduction to the ICE. There is more information on the CD in the ICE directory, and in AVR Studio documentation an ...