Inter-m PAM-324 Operation Manual

Welcome Welcome A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products. We sincerely trust this product will provide years of satisfactory service, ...

1 PAM-312/324/336/348 Contents Contents Unpacking .......................................................................................................................................2 Installation environment............................................................................................................................ ...

2 PAM-312/324/336/348 Installation Unpacking Unpacking Although your PAM-312/324/336/348 is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation. As with most electronic device ...

3 PAM-312/324/336/348 Features Contents and Accessories Contents and Accessories 1. AC cord x 1EA 2. 3P Terminal Block x 8EA 3. 6P Terminal Block x 1EA 4. User manual x 1EA Features - A CLASS-D AMPLIFIER CAPABLE OF PRODUCING 120W/240W/360W/480W OUTPUT IS ADOPTED. (PAM-312: 120W, PAM-324: 240W, PAM-336: 360W, PAM-348: 480W) - THE AMPL ...

4 PAM-312/324/336/348 Front Panel Front Panel 1. INPUT VOLUME CONTROL The knobs are used to adjust the volumes of INPuT 1~6. Adjust the volume as you wish using the controls. ※ set the controls of the unused input terminal to the minimum value. 2. TONE CONTROL The knobs are used to adjust the bAss (100 Hz) and Treble (10 kHz). You ...

5 PAM-312/324/336/348 6. POWER SWITCH It turns the power of the device on and off. When the power cord is plugged in, the device stays in standby mode. When the power switch is turned on, the device is turned on and the power indicator displays the green color. 7. POWER INDICATOR It is an indicator to display the power status. When t ...

6 PAM-312/324/336/348 Rear Panel Rear Panel 1. AC POWER INPUT TERMINAL It supplies power to this device. The power source is Ac 220 V, 60 Hz. do not bend, pull, twist, heat, or cut the power cord excessively. It may damage the cord and cause a fire or electric shock. 2. SPEAKER OUTPUT TERMINAL It is a terminal to connect with the spe ...

7 PAM-312/324/336/348 3. IMPEDANCE SELECTION SWITCH It is a switch to select the impedance before connecting with the speaker(s). select 70V or 100V impedance as desired. 4. TEL IN TERMINAL It is a terminal to connect and use a unit such as TP-6231A, Private branch exchange (PbX), or Paging Adaptor. You can broadcast through the tra ...

8 PAM-312/324/336/348 (2) INPuT GAIN Volume: It adjusts the input sensitivity. If you set the volume to minimum, a signal of - 20 dbV (100 mVrms) can be input; if you set the volume to maximum, a signal of -60 dbV (1 mVrms) can be input. ※ since the Xlr jack and the euro terminal in INPuT 1~3 are internally connected, do not use th ...